elsie
Well-Known Member
- Posts
- 1,300
- Location
- the very wonderfull Conwy Valley
Simple question , Is the rear floor in my disco 1 , 300 tdi , part of the MOT test . IE is it structural , can it be replaced with ply for example ?
rear floor
- Thread starter elsie
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
1spin
New Member
- Posts
- 1,290
- Location
- centre of uk
it will fail if its rotten, end of...
And no ply board either plate it , or new floor panel ,or checkerplate it.
Last edited:
elsie
Well-Known Member
- Posts
- 1,300
- Location
- the very wonderfull Conwy Valley
Replace with checkerplate or cover over ?
wiltshire landyman
I’m back
- Posts
- 15,062
- Location
- salisbury plain wiltshire
just put a new floor pan in there cheap enuff
elsie
Well-Known Member
- Posts
- 1,300
- Location
- the very wonderfull Conwy Valley
Not a cost issue just trying to find a floor that won't rot in 12 months !!!!!!!!
JonnyP
Well-Known Member
- Posts
- 1,918
- Location
- Sunny Cornwall
it will fail if its rotten, end of...
Mine was very rotten and full of holes, but it passed the MOT and only got a mention as an advisory. The floor is not structural. The only way it will fail is if the seat belt mounts go through are shot.
1spin
New Member
- Posts
- 1,290
- Location
- centre of uk
If you fit a new floor pan , just make sure you have treated it well , ie ruststop primer , and plenty of underseal and waxoil etc under it..
Paulmitchell1984
Well-Known Member
- Posts
- 1,819
- Location
- Leeds
or get a galvanised floor, last longer
iv just got an issue now with seatbelt mounts being too short so they dont sit flush.
iv just got an issue now with seatbelt mounts being too short so they dont sit flush.
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
Technically seatbelts don't mount to floor! they are actually fastened to a bracket that passes thru floor and attaches to chassis.
