Need an engine!

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

83series

Member
Posts
63
Hello,
Friend has bought a series 3 diesel with a poorly poorly engine blue smoke, white smoke, leaking out of every orifice.
Does anybody out there have 21/4 diesel in alright condition?

looking to pay cash and collect this week as he needs it for work!

Many thanks.
 
12j is very similar to the 10j apart from......

1984 was a 2.5-litre diesel engine. This was little more than an updated version of the existing diesel unit[32] (at this time 22 years old). The stroke was lengthened to improve torque, and an updated cylinder head was used to reduce noise and emissions. A more modern injector pump improved fuel economy and an improved glow plug system improved cold-starting performance. The most significant change was the swapping of the chain-driven camshaft for one driven by a fibre toothed belt, which also drove the repositioned injector pump.[33][34] The drive vacated by the injector pump was used to power a vacuum pump for the brake servo system. To reduce engine weight, extensive use of aluminium castings was made for the cambelt case, vacuum pump, rocker cover and other parts.

So maybe not a bad idea if your changing one anyway
 
12j is very similar to the 10j apart from......

1984 was a 2.5-litre diesel engine. This was little more than an updated version of the existing diesel unit[32] (at this time 22 years old). The stroke was lengthened to improve torque, and an updated cylinder head was used to reduce noise and emissions. A more modern injector pump improved fuel economy and an improved glow plug system improved cold-starting performance. The most significant change was the swapping of the chain-driven camshaft for one driven by a fibre toothed belt, which also drove the repositioned injector pump.[33][34] The drive vacated by the injector pump was used to power a vacuum pump for the brake servo system. To reduce engine weight, extensive use of aluminium castings was made for the cambelt case, vacuum pump, rocker cover and other parts.

So maybe not a bad idea if your changing one anyway

so engine mounts should be the same and same stud pattern for the gearbox?
Also is the 2.5 rod accelerator or cable?

Thanks
 
don't you need to move the drivers side engine mount a bit cause the normal one fouls the injector pump.... and its cable so you need to fabricate something..
 
It's a cable throttle on the 2.5 as opposed to the solid linkage with the 2.25.

You need to move the o/s engine mount too as the injector pump is alot wider at that height.

If it's speed of fitting you're after, a 2.25's your best bet
 
Just bought a 2.5N/A 12J engine rebuilt by previous owner i dont need it as i have a 200 TDI for what i need will be sticking it on Ebay unless you are interested? after £220ono for it Dudley west mids if you are interested call or txt 07723551253 Cheers George
 
Back
Top