What have you done to your Landie today.

Took its picture.

Ive got 6 on the go
200 tdi disco mot work full sills and brake pipes
300 v8 disco mot work sills and wheel arches and rocksliders
200tdi trayback disco full rebuild of innerwings and front bodymounts and battery trays
90 2.5 n/a mot work the engine swap
hybrid rangerover/90 challenge truck lots of work
finally just finished
series 111 diesel mot work rear hub seals and repairs to handbrake levers
also helped a mate today with wiring problem on ex mod 90
keep me quite for a bit
also got 4 series to rebuild

Took it to the tip with 3year old niece after she said " I know someone who really wants a ride in the yandrober"

cut the arches out and finally fitted my 35"s

Got my heated seats wired in.

fitted me noo (old) Transfer box. and drained the gearbox and refilled it.. oh and adjusted the parking brake..

Took mine for a wash at river in Knowle. Also found out the ford at jobs lane packing ton is now closed

Pressure washed the underneath of my Defender to get rid of all the mud as well as the body, Continued to clean up the Discovery axle ready to go on, topped up the washer fluid, engine oil, coolant and tightened the power steering belt :biggrin1:

fitted a bigger fuel tank....now 55litre (12.5 gal) instead of piddly 26.4litre (6 gal) and wired in fuel gauge.

Cleaned the innards a bit so its now semi tidy

Changed the Diff oil's

Purchased me Landy Zone Sticker !!!!!!!

Bout F'ing time

Fitted the pipework as a conduit and ran the wiring for the spots through it. Still looking for a relay ... I know I have one somewhere!!

removed the rear prop shaft finally after having to grind one of the nuts off the handbrake hub end. dam butter nuts they just rounded straight away!! have to renew my handbrake shoes and transfer box seal.

Iv resealed the clutch master cylinder, done all the nessesery bleeding but still no clutch. Im now thinking this is going to cost me a few quid.

Took mine for a spin to buy some roof bars. I can start using my rooftent at last.

FIXED IT WOOOOP

well nearly

Unstuck the diff lock using this fab site to guide me through, some ham fisted bafoon had already done it once, but instead of drilling the rivets out for the cover & replacing them had simply forced the cover off & left everything loose! Never mind the diff's all loose now & ready to play & the cover is all tight.

Also got around to swapping my window switches round to identify why two of them aren't working.....found one dodgy switch then ran out of time. So a job for another day is to take the door trim off to see what's going on there.

replaced drag link end when i got in from work... in the dark.. no garage..

took the whole bar off, stuck in my garden bench vice.. ****ted the **** out of it for 45 mins and finally got it loose..

all back together.. shortened it a bit to straighten mi steering from when i did the other end.. lol...

Ordered a Safari snorkel to replace the ugly mushroom.

Andy Land said:

Ordered a Safari snorkel to replace the ugly mushroom.

Click to expand...

Dull question maybe but it has crossed my mind.. the ECU is located next to the jack/battery correct? - I have been advised to check the wiring loom for traces of oil in the connector as it can short things out.. (still have to check this when I find out where it's located).. but when wading isn't the ecu/ connectors a worry or do you waterproof them? - just curious as it seems a strange place to put them, considering the shogun had the ecu units hidden in the dash just underneath the heater controls, high up.. each one to their own,.. just wondering how durable they are to any sort of harsh treatment