200Tdi AutoBox problem

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Andy200TDi

New Member
Posts
269
Location
Nottinghamshire
Help... I have no drive!...

accelerating across a junction, suddenly a low thud (no crunch) and loss of drive. Only doing around 30mph. Tried going through gears (even tried hi lo and diff lock) checked oil level (have had some leaks in recent months but all fixed now) all ok. Don't think any drive shafts have stripped (no mechanical noises), suspect box internals... Any theories, what's best option, Dump, strip or replace?
 
are you a 100% sure its going into difflock check condition of both t/box and gearbox oil

Diff lock light comes on when in and off when out... not used often but I know it did work... oil in box is relatively new due to recent leaks and top ups. all leaks fixed now. just doesn't fell like it's picking up inside the box. (transfer box was giving feedback when trying it just before she rolled to a stop)
 
Remove cover on back of t box and look at the output shaft adapter and t gear.
They can suffer from the splines wearing away.
 
could be center diff and still get gear feel ,cogs are replaceable wooden teeth fitted to a cog wheel often seen in windmills etc
 
Remove cover on back of t box and look at the output shaft adapter and t gear.
They can suffer from the splines wearing away.

If shaft adapter gone... I would still get cog feedback from tranny when rolling, but no response from G box ... right?

however would g box still go through gears? 'cos it don't ... it's just like being in N.
 
Back
Top