any ideas???

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
P

PROJECT_DORA

New Member
Posts
52
Location
carmarthen, south wales
quick question... i have a 300tdi disco. what is the name of the pipes between the injectors? they loop from one to the other and are bolted to each injector. need the exact name to make it easier for the "parts expert" on the phone that has "no mechanical experience":confused:

help needed. many thanks!
 
I think you can buy that pipe from halfords in 1 metre length for a couple of quid. Think its 3mm diameter. Just cut it to length with stanley knife. Just beat you there James :D
 
PROJECT_DORA said:
quick question... i have a 300tdi disco. what is the name of the pipes between the injectors? they loop from one to the other and are bolted to each injector. need the exact name to make it easier for the "parts expert" on the phone that has "no mechanical experience":confused:

help needed. many thanks!
Click to expand...

Land rover call it a "spill return assembly" Part number ERR3306, this part number may have been superseded by now but that's what its called in my '94 Defender parts catalogue.
 
Last edited:
they are leak off pipes ,spill pipe was used to time accurately inline injection pumps to determine begining of injection,return pipe is what they do,but not whay there called
 
cheers. also need the bit's in between. should explain. i've been working on the disco on the road (moved to a house with no drive and no garage! WHAT THE f**k?) and i took the injectors out to change the seals and dropped the whole rail down a drain. so need the pipe and the...."bits inbetween".
 
PROJECT_DORA said:
cheers. also need the bit's in between. should explain. i've been working on the disco on the road (moved to a house with no drive and no garage! WHAT THE f**k?) and i took the injectors out to change the seals and dropped the whole rail down a drain. so need the pipe and the...."bits inbetween".
Click to expand...

Can't you get it out of the drain ?
 
PROJECT_DORA said:
cheers. also need the bit's in between. should explain. i've been working on the disco on the road (moved to a house with no drive and no garage! WHAT THE f**k?) and i took the injectors out to change the seals and dropped the whole rail down a drain. so need the pipe and the...."bits inbetween".
Click to expand...
The part number I quoted in my ealier post is for the whole thing including the banjo unions but not the bolts and washers.
 
thats because engineers that learnt from older engineers dont write parts books or manuals any more,ive even had to point out at one time that 110 backplates for rear drums couldnt be superceded to same part
 
You must log in or register to reply here.

Similar threads

C
Disco 2 Td5 no power, changed loads and at a loss.
2 3 4
Replies
74
Views
4K
EeEk
EeEk
tyregeezer
2.7 tdv6 Jag to LR3 differences
Replies
7
Views
619
tyregeezer
tyregeezer
JokerUK
RRS 4.2 S/C won't idle
Replies
7
Views
514
Rubberknees
Rubberknees
vanillarebel
DPF cracked - not convinced
Replies
6
Views
2K
lynall
L
J
Introduction and PAS problems...
Replies
1
Views
186
JakeFrost
J
Back
Top