What wheels are these?

http://www.flickr.com/photos/63501747@N02/5777415381/ (tried to upload not sure it worked).

Does any body know what model wheels these are? I'm trying to determine if they strong enough to take a Defender 110.

I'm told they are Discovery wheels.

Thanks,
Ben

Look like they're from a 200 Tdi.

arienol said:

Look like they're from a 200 Tdi.

Click to expand...

^^^wot he said^^^

200tdi disco definetly

Thanks, I'm guessing they won't be up to the job then.

benpalmer said:

Thanks, I'm guessing they won't be up to the job then.

Click to expand...

what job is that ?

I had a range rover classic with those on, the wheel center had ranger written through it. Dont know if this is of any help, we got the classic when it was 4 years old in 1993 and they were on it then.

mark

squizzel said:

I had a range rover classic with those on, the wheel center had ranger written through it. Dont know if this is of any help, we got the classic when it was 4 years old in 1993 and they were on it then.

mark

Click to expand...

as has been said they're definitley of a 200 disco, rrc and disco 1 wheels are interchangeable. Check my avatar I have rrc wheels on mine .

I'm looking to stick them on a Defender 110, but i know some of the disco wheels won't carry the load of a 110 however some newer ones will, was hoping these were the newer one!

i've seen 300tdi defenders with disco alloys on

Yeah, but the alloys are only rated to a certain load. The 110's capacity exceeds that.

alex8882 said:

i've seen 300tdi defenders with disco alloys on

Click to expand...

90 defenders are ok, 110 defenders can carry more weight than the alloys are rated for.

benpalmer said:

I'm looking to stick them on a Defender 110, but i know some of the disco wheels won't carry the load of a 110 however some newer ones will, was hoping these were the newer one!

Click to expand...

unless you are doing comp safari or towing well over your tow limit wont be any problem. as long as they fit over the hub cap/flange

GRATCH said:

90 defenders are ok, 110 defenders can carry more weight than the alloys are rated for.

Click to expand...

Slow old coont aintcha

GRATCH said:

90 defenders are ok, 110 defenders can carry more weight than the alloys are rated for.

Click to expand...

so why do they fit alloys on 110's then? guess i better get shot of my original LR alloys off my 110 then

buckshot said:

so why do they fit alloys on 110's then? guess i better get shot of my original LR alloys off my 110 then

Click to expand...

IIRC Buck, the 110 alloys do have a higher rating?

buckshot said:

so why do they fit alloys on 110's then? guess i better get shot of my original LR alloys off my 110 then

Click to expand...

Ya silly old coont. Defender alloys are fine on 90 or 110. Discovery alloys aren't rated for 110.:doh:

Matt TDi said:

IIRC Buck, the 110 alloys do have a higher rating?

Click to expand...

yeah well i'm still ****ed then cuz they were swapped with the same that were on my 90 before the salvage lorry pick the 90 up (ones on the 110 were well grotty lacquor and paint flacking)

How heavy are you?

Matt TDi said:

How heavy are you?

Click to expand...

fook off! mind yer own biz