Part # help

I have looked everywhere and spoke to a few places with no luck.
Perhaps they dont understand me?


I have a 1999 300tdi truck cab.

The truck cab has a rear window with 2 pieces of sliding glass.

When both of the pieces of glass are shut, in the middle of the window where the 2 pieces overlap on the end of each peice of glass there is a "cap" of sorts. Its black and fits on the end of both pieces.These seal the window and stop the glass from rattling.

One of mine is missing and this causes the window to rattle horribly.

Thanks.

that'd be
AEU 2805 LH
AEU2806 RH
or
MWC 7625 LH
MWC 7648 RH

Click this link & scroll down to page 867

http://www.retroanaconda.com/landro...csi_scan_filename=9_body_chassis_p794-923.pdf

Tivster said:

that'd be
AEU 2805 LH
AEU2806 RH
or
MWC 7625 LH
MWC 7648 RH

Click this link & scroll down to page 867

http://www.retroanaconda.com/landro...csi_scan_filename=9_body_chassis_p794-923.pdf

Click to expand...

Nope.

Those part #s are for the catchs.

I need the strips on the other end of each glass, it runs the length of the glass. Its black metal or plastic (not sure) but has nothing to do with locking the glass.
It seals the 2 pieces of glass in the middle when the window is shut.

Thanks.

only some of the numbers are for catches the others are for draught rail and seal

I wedge mine with cardboard BUT I reckon you could go to a staioners and get those plastic sleeves that hold together reports and projects.

Might be easier and cheaper!

Its the things running down the middle vertically, each glass has one so that they seal when closed or open.

mwc7652 i think see if that helps.

Gilbo09 said:

mwc7652 i think see if that helps.

Click to expand...

I need the part that that part fits into.
Thats the rubber seal, I need what attaches to the glass and the seal fits into.

Thanks.

ignore me then!

just a thought would the one from the front slidy window on a series do the job?