Clutch slave part needed asap

Guys,
My clutch biting point is very low and when hot struggles even more. I need to replace master/slave units soon but having probs sourcing.
CLUTCH MASTER CYLINDER
this looks like both parts in one but I tried rimmerbros and it looks like master and slave are sold seperate.
Can anyone give me some help and where the best place to buy is. Also do I need to buy a bracket? car is 2001 1.8 with chassis no ending 1A312***

help appreciated
Martyn

Try Brookwells.

It wont be the one where the slave and master are seperate, that's for TD4's.

You'll be able to find it cheaper than on the link you've posted. Usual price is around £50.

It's also advisable to change the bracket as these can break quite often (may be the cause of you needing to change your hydraulics).

STC000180 CLUTCH MASTER & SLAVE CYLINDER ASSY | Freelander 1996>: Clutch | shop | www.lrseries.com | L. R. Series

Chances are your clutch plate is fugked/on its way out.

hi try one of main dealers there a 2 slave master cylinders for the 18, had mine do the other month, the bracket needed replacing that was 15 quid. but bet you your clutch is on its way out soon as i had the above done on leaving the garage the clutch went so had the hole thing done. there is an upgrade you can go for so went for that..

Got one from Dingbro yesterday for £42 and a bracket from Land Rover for £10. Its easier to get into gears but still low biting. Looks like clutch soon