1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Si Click's Recent Activity

  1. Si Click replied to the thread Wanted Urgent requirement!!!!.

    You can get 'em here. https://www.quantumenterprises.co.uk/roundtuit/help.htm#anchor234700 Keep it secret, keep it safe. https://giphy.com/gifs/oskouioskoui-lotr-gifscapade-3oFyCYNrra8qo1Cv8Q

    Mar 22, 2019 at 3:00 AM
  2. Si Click replied to the thread which are the best shocks for a Disco 2 at the moment?.

    Anyone tried Koni Raids?

    Mar 20, 2019 at 6:24 PM
  3. Si Click liked jamesmartin's post in the thread Disco 2 Knuckle joints - how much?!.

    its easy on the 4th or 5th times the joints just tap in easily showing the location hole has stretched that much its barely holding the joint secure

    Mar 20, 2019 at 6:42 AM
  4. Si Click replied to the thread Disco 2 Knuckle joints - how much?!.

    Just looked through RAVE. That does look like a pig of a job, doubly so without the dedicated LR tools, respect to those DIYers taking it on. I noticed that you are only supposed to do it 3 times before replacing the axle case. How do you know...

    Mar 19, 2019 at 11:35 PM
  5. Si Click replied to the thread P38A Prop Shaft Universal Joints.

    You need to use something with penetrating capability. I use PlusGas as well but there are plenty of others. WD40 will lubricate moving parts and give a degree of temporary rust protection (ACF50 is far better BTW), but it is not a penetrating oil.

    Mar 19, 2019 at 9:10 PM
  6. Si Click replied to the thread Sluggish after EGR removal..

    A potential issue with EGR blanking and silicone hoses is that it can be very difficult to get a reliable seal on the hose from the intercooler to the new intake manifold pipe unless there is a large overlap. It can slip off very easily due to...

    Mar 18, 2019 at 10:05 PM
  7. Si Click replied to the thread How do I re-instate the ACE system if it's been disabled?.

    Just one more thing to go wrong IMHO. I know that sounds trite, but these are elderly vehicles and every little helps, particularly if you plan on fixing it yourself and driving it far from LR Specialist garages. Bottom line, my TD5 has the ACE...

    Mar 17, 2019
  8. Si Click replied to the thread Disco 2 Replace td5 exhaust manifold - accessing the nuts!?.

    No probs with my Flatdog set. They have worked well on D90 and D2 TD5s. I notice that the set off EBay do not have the stepped handle on the spanner. This step means you can hold the stabilizing spanner vertically in your left hand and apply...

    Mar 17, 2019
  9. Si Click replied to the thread Disco 2 Replace td5 exhaust manifold - accessing the nuts!?.

    This is what you need. £16.80 inc VAT https://www.flatdoguk.com/-v8-viscous-fan-spanner-set~1002

    Mar 17, 2019
  10. Si Click replied to the thread Td5 fuel problem, pulling my hair out ☹️.

    Without wishing to stir this further, my take on the aftermarket CPS is that I will bite the bullet and buy a genuine one if my existing one fails. However, the one I have in my get-you-home spares kit is by Bearmach, and yes it does work....

    Mar 17, 2019