Recent content by Ginger Tom
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
-
G
Here is the turbine housing and turbine wheel comparison between our TD04 and the HX221W.
-
G
Get it all figured out, fitted and running first
-
-
G
I have an 11mm pump head fitted atm and from what I have read the injectors are good for upwards of 300hp
-
G
@RangeRoller dt @brianp38dse here is a pic of the three different turbos we have been talking about for a size comparison.
-
G
At about 6500rpm.
I'm going to use the holset he221w off the Cummins lump as that is better suited for the Rangie and it may fit inside the TD04 exhaust housing without too much hassle, may need to adjust the waste gate actuator...
-
G
Lol I think the gearbox will go first
-
-
G
The lump is being pulled for a rebuild and I have a turbo at work from a 3.9/4.5 four pot Cummins diesel out of a bus that is more that capable of giving the power without the added issues of vnt/vgt
-
G
Thinking more along the lines of compounding
There are companies that make a full Ali rad for around £200 that are triple core and the right size, Datatek has sent me the info to conver the Aircon fans to run in conjunction with the viscous fan so cooling shouldn't be an issue.
For the power...
-
G
It's off a 2003 blobeye wagon that I used to have but the plan is to convert it over to the Rangie
-
G
Those are two things I need, a metric DTI and a Nanocom, but for now it's time to sort this **** pit out.....
-
G
No, a lot of work was done at night as it's the only time I can get free from the house, I do try and take pictures as much as possible.
When I pull the engine out to properly rebuild it I'll try and do a time lapse video of it, I'm sort of hoping I'll be put on furlough so I can get the time...
-
G
Didn't get the timing right cause I was in a rush, now I have a knock
-