Thanks for the link Rattlegun. If 906-00001 A would be 1971 and 906-07270 A would be 1975 that could make mine 1973 which would be nice :), unfortunately production figures could vary dramaticaly over the time slot so might sway either way. I think the vents are small but I'll need to...

Hi, I bought a series 3 88" diesel before christmas and managed to haul it home this weekend. The last owner died several years ago, it has no v5 or number plates, is missing some parts and looking very miserable. I only paid parts/scrap value for it but the chassis could be fixed and and...

Hi Jamesmartin , thanks for the info, thats exactly what I wanted to know. Hi philvy, yes you could be right, but I still love the old girl!

Hi guys, I would like to fit a S3 speedo into my S2a, I know the speedo cable connector at the head end is threaded on the S2a and the S3 is clip on so I would need to replace the cable but will the drive end then fit? and would it read correctly? Bilco

Hey rog8811, that's great! Many thanks. bilco.

'Naw, wish it was, for an oldie like me its a bit like painting the forth bridge, when I finish its time to start again! I'ts not in bad nick though and the gaiters are part of my front axle project. bilco.

I want to make my own leather swivel gaiters for my 2a, I would like to choose my own leather and tinker around with them a bit. I'm sure someone has done this before but despite scouring the internet I cant find a basic pattern or any info. Does anyone have a pattern / information? Or is...

Is'nt it amazing how you think you know something for certain for sure, then someone casts doubts so you research it and end up in total confusion. Simple 10" leading shoe brakes, this is how I believe it should be.- Leading shoe to the front (backplates mounted with snail adjuster forward)...

I have the Haynes toytown manual for the 2a which at least gives me an insight into the 2a 'gubbins and also the downloadable s3 manuals so I can at least muddle through but I find I have a continuing problem with part numbers, can anyone point me at a source for 2a specific manuals or part...

Hi pikefly, It's back together now, complete with new castle nut/pin. The way the FWH is constructed prevents anything falling out but I can't believe it should be like that. I was going to leave the other side alone but I guess it will be the same so best to take a look. The really...

Knew I'd forgotten to mention something important, there was NO CASTLE NUT/SPLIT PIN on the half shaft, it has to have been like this since before my ownership (5 years) but surely this is not right. The little felt gizmo was just sitting on the threaded part at the end of the half shaft...

Thanks oxides, I'm sure it will be the same PN on my 2a, I'll be glad to get it finished. Bilco.

Got the screws out by placing a nut over each one at a time then welding them in place down through the hole, the intense local heat from the mig may have also helped but whatever they spannered out from there. 'Phew! Checked the new seals and they are leather/metal so I will stick with that...

Hi oxides, I think you're spot on, has to be both axle and hub seals. Not noticed the diff oil dropping but I suppose that although the mess in the brake drum looks like gallons in real terms it may not be much. Bilco

Bought another hand impact driver for its bit set, interestingly its identical to the Talco one I already have but different brand name. Two of the bits have a close to optimum profile so was able to give all three screws quite a pounding. None of them budged, not even the slightest movement. I...

Been out for a few beers so please excuse any typos. Mine are simple slots not cross head hex or torx, Ive thrown a day at sorting them with zero result, I believe they will break before they will come out. problem as I see it is that drilling a steel screw out of an ally cap is a basxxrd of...

Hi Oxides, Thanks for the super fast reply and the tip about the seals, not opened the jiffy bag yet, I've packed in for today but in the morning I'll have a look and if neccessary I'll order some of the leather type. Tried an impact driver but not too hard because I dont have a bit with a...

Gear oil all over the o/s front brake shoes on my '61 2a. Started a month ago so as a temp I dumped the oil from the swivel hub, washed everything with petrol and ordered shoes and hub seals for both sides. Started the job today, more oil on the shoes (lots of it), dont know where that's come...

Hi guys and thanks for the quick replies, L.R.Series are listing an 87 onwards seal so that would be metric. Woolies trim is looking good, they have 3/16" to 1/16" rubber (Part no R408C) I'll ring them tomorrow to make sure but my guess is it will be fine. :):) Thanks once again.

I need to replace the rear window glazing rubbers on my S2a, that's the two small windows each side of the rear door. The originals rubbers seem to be 3/16" for the glass, 1/16" for the body and body to glass 1/4" , I'm guessing 5mm -1.5mm -6mm would do the job but I dont think thats a stock...