Hi there ☺️ Diff has recently been covered in oil coming from above- engine oil. Gave a good clean up to the engine and gave it some road to see where the leakage might be coming from. Drops can be seen forming on one of the oil cooler pipes (crimp area) and filter bottom. However, the area...

Hello guys. Thanks for the information. The problem was a missing earth the one at the rear door. Took it off myself by mistake and did not re attach it when I converted the landy to a soft top. However, previous owners seemed to have removed the Left side rear tail lights and indicator earth...

Where to start though? Should I look at the bunch of wires coming out from the driver side chassis and separating into 2 bunches (Left and Right)? ... and the connectors that exist to split the earth to all rear LEDs are found in the rear corner compartment? Also, there was a negative wire...

Hi all. Good evening. Something new has come up with the landy - flickering tail lights when engine is ON. Brake and indicator lights light up at the same time, no flashing but flicker lightly. This only happens at the back. Front lights (also LED) work perfectly. Any thoughts? Thanks!

Yeah saw that thread in fact. But they’re a 97 version. Did you find them ok for yours? (If I understood correctly, you have a 94 300tdi?)

Hi everyone ☺️ Could someone kindly help me out in finding the electrical/ wiring diagrams of a 300tdi (1994) defender please? I came across a 1997 one, but I dont want to rely on it since its there are quite a few years in between… Thanks in advance!

Ok. Found it 😅 first time rebuild and everything seems to be going missing no matter how organized I am. Thanks man!

But is it just there to close the hole or attach something to it? As mine was never there to begin with. It was left open 😅

.

Can someone identify what bolt comes in here please? Marked in red for reference.

The bolt underneath should be around 6mm width. But length and head dont know how they are

Not the nut :/ the bolt underneath it …

Can you kindly help with the above, please? Bolt ID - Retaining plate intermediate shaft lt230 Thanks in advance.

Thanks guys! Would you mind sending a picture of it please? As the only one I found very similar to what was already there before is the one I posted up here. However, for the new one, its outer lip seems much bigger, whilst overall shape is the same as the old ... the previous seal was rock...

Hi guys. Has anyone ever tried changing the speedo seal please? When fitting there doesnt seem to be any space where it locks itself in… as soon as I move its housing, it falls off…

Hi there! Good afternoon. Currently doing a 1.4 LT230 rebuild. Currently dismantling the front housing and saw that its slightly pitted. When adding the oil seal, would it be fine to a little gasket sealer to help with the pitting or is this a bad idea? Thanks in advance.

Thank you everyone for your replies :) really appreciate the help.

My 90 is originally came out with a 200tdi. However as far as I know, its an original engine. Previous owners just swapped engines.

Hi everyone. Woman trying to understand what problems her car is up too here 😅. I currently have a problem with my Tdi 300 and have oil in my turbo hoses, the ones going from turbo to air cleaner and the one going from the turbo to the intercooler. Checked the turbo already for any loose...