Over the Xmas period I'm going to start breaking this Disco. It still starts and drives but is suffering the rot big time. Last mot expired Nov 14, but please note it hasn't been on the road for about 3 years but has been in constant use on private property. Vehicle is located at DY13 0AH.

Howdo all. Having a clear-out of the last Land Rover related items. I have qty 8 seat belts that were going into my 110 but never did. I have 6 listed on ebay at the moment but am willing to sell here if anyone wants some. 4 Point Harness Seat Belt. New, Never Fitted. | eBay...

Hi all. Thought I would try my luck here with a few bits before putting them on ebay. Due to selling my 110 I now have a few bits that didnt get included in the sale. New Left Hand bulkhead outrigger £20 New Right Hand bulkhead outrigger £20 New Split Door Cappings, Galvanised for...

Bought this late last year and have already got bored of it. Land Rover 110, panel van. 12 months mot. 2 months tax. 1986 'C' reg. An ongoing project. Comes with a few new parts for known jobs that are needed. Only selling due to a change of direction with other projects now dictating some...

Due to a knackered thread in my current housing I am in need of a complete oil filter housing. Posted to dy130ah. Please pm any offers. cheers

200Tdi engine that was fitted to my project 110. Condition is smokey!!. I have run this engine since October 2012 and it had a few issues. 1. Timing belt pulley and fan belt pulley worn but now replaced with new items. Timing belt also changed at the same time. 2. Outer woodruff key was...

Rear axle from a 300tdi disco. Condition unknown as it came with my 110 project so is for spares/repair. Is complete with diff, shafts calipers but will need a good service and probably un sticking of the brakes. Looking for £50. Located at Stourport-On-Severn. PM me for my mobile...

Hi all. Quick question, is the following information suitable for changing the washer jet on a TD5 130" Defender '03 reg? Don't really want to remove the dash as it's a mates truck. http://www.landyzone.co.uk/lz/f7/replacing-windscreen-washer-jet-defender-tip-108178.html Cheers, Lee.

Looking for a well priced good transfer box off a disco etc for my 110. Have sorted the 200tdi so it has a bit more power and swapped the 205s to 750s. Next is a better ratio t-box as I spend a lot of time on the motorway. Local to Stourport if possible. Cheers.

Looking for a roof rack for my latest toy. A 1986 110 hard top. Ideally in the west Midlands. Would consider a very cheap 90 version just to get me started. TIA

Im going to swap the rear Axle on my 110 to a disco 300tdi one. I already have the input conversion to a 4 bolt fitting but as the axle coming out is a Salisbury version the current prop is too short. My question is can I leave the rubber drive fitted and use the disco prop? Once I convert the...

I bought these 4 rostyle wheels off ebay and cant collect until the end of the month, is anyone coming this way that could move them for beer tokens. Classic Range Rover/Land Rover Rostyle wheels | eBay Cheers Lee

I am in need of doors for my next 110 project. Its a 1986 and a friend thinks these might fit, The correct link...

I have just bought my next project of the bay of e and am in need of a few parts. No rush as I wont be able to start colleting the stuff until next month as working abroard. The list includes; Right front door Left front door Bulkhead Freestyle alloys with tyres Bull bar 300 tdi disco diff...

I am currently looking at buying a 110 Ex MOD Land Rover. Which and what I have not decided yet but the answers here will go a long way to helping me decide. I am fully aware how gutless these things can be but have stored on my drive my wifes old 300tdi Disco that has literaly fallen apart...

Im looking at reviving my old series 1 that was pulled apart and stored about 2 years ago. Its already been coil converted and the original engine and box where put to use in another vehicle. The body is minimal and there will be a full cage/space frame when put back together. I have a 325...

The other half mentioned that a loud noise was coming from the rear diff. Sounded like a bag of spanners were in there. Pulled it out today and the little planet gears that turn on a shaft thru the diff centre had some serious damage.... Turns out that the shaft had snapped in half and was...

Right, removed the inspection plate of the back of my lt77 and the drive line play from the output to t-box input is massive... As this is just a thrash around vehicle, whats to stop me just welding the two items together??? whilst I secure another box to be fitted when the clutch or box next...

I am planning on fitting an LT77 to the arse end of my 2.0 Perkins Prima TD then throw the hole lot into my coiled 80. I already have the bellhousing and aquired a so called good Disco box with t-box. Pulled my Disco box apart today and found the output shaft and t-box input are stuffed...

Anyone travelling this way that could collect qty4 31/10.5x15 tyres. Not on rims. Cheers Lee