I've been running live data on my Face-lift L314 Td4 Fuel compensation is showing the following reading Injector 1 14.58mm3 Injector 2 8.54mm3 Injector 3 14.50mm3 Injector 4 13.68mm3 I'm using Launch X431 V2.0 for landrover. Some information found states my injectors should be reading around...

While running the DTCs and exploring other modes available on my 2006 L314 Td4 I've switched the Cruise Control light on, could this imply the ECU may be capable of having Cruise fitted ?

I'm the process of fitting an EGR Delete to my 06 Freelander Td4. Do I cap the little vacuum hose off or just leave it ?

Do you think this might need replacing

After inspection of my stock intercooler, which had a large amount of gloopy oil in it I'm thinking maybe I can get a larger one to do a more efficient job. I appreciate that landrover spent a lot on this stock intercooler. The one on my car had taken a bit of a ding

Intercooler out. Found more damage boo.. Thinking I might have found why I'm getting bubbles in the coolant without losing loads.

Does the face-lift freelander 1 Td4s have a separate auto trans cooler or is it like my previous Volvo's in the Radiator?

I'm planning on cleaning out the intercooler on my 06 Freelander 1 Td4. Quite a large amount of goop inside. I've read all kinds of horrors on Facebook about putting petrol through, is there a touch safer way of doing it ? I'm thinking after how badly the previous owner treated the car (They...

Good evening Finally rebuilt the "money pit" freelander 1 Td4. Car will not start :( "Unhappy bunny" I've been told that I need to generate around 150bar or 2000psi. What OBDII scanner will work without costing me insane amounts? Temu/Aliexpress are no goes. Will the Carsoft or Launch X431...

Good evening ladies and gentlemen. I need to pick the brains: I'm in the process of sorting my 06 Fl1 Td4. Replaced the Cam cover gasket, both injector seals rubber and copper washers, two copper weren't unplace. During this process the entire plastic air filter holder had to come off, all is...

Good evening, I have a 2006 Freelander 1 Face-lift Td4 that has a slight issue: There are bubbles in the coolant bottle when the engine is running, although a sniff test hasn't shown up exhaust gas, it's alsmot as if there is no thermostat in the car because the coolant is being cycled (is this...

I'm in the process of refitting new suspension to my newly acquired Freelander 1 L314 Td4 auto. Previous MoTs show advisory for all the bushes. As I'm a bit too picky I'm replacing all the bushes. The dilemma is the rear driver side shaft is seized in the hub, after having a detailed...

I have an issue with my 06 Freelander 1. Replaced the pads. Found the dust seal wasn't in a good shape, ordered a replacement kit. Went to fit, dust seal is too large (not happy) I've now found there are two sizes 54mm and 57mm pistons, as I have one of the last FL 1's which should be the...

Evening. Planning on converting a manual Freelander 2 to Automatic. Other than the greasy, clunky bits what else do I need to know? I've been told the cranks are different. How true is this or are they referring to the auto drive plate connecting to the Torque converter in place of the clutch...