1. R

    Auto Gearbox Oil Level

    Hi, Just been to change the oil (or as much as I can) and filter in my auto box. I have read many posts on this, but have one question. Before I started, the box was still warm and with the engine running I put it through each gear for 1 second. Then I removed the filler plug (to make sure...
  2. R

    ZT Autobox blowing reverse light / brake light fuse?

    Hi, I have a problem with my brake light / reverse light fuse blowing as soon as I select reverse. (Automatic ZF box 2004). I have checked all bulbs, cleaned all contacts except on the gearbox itself. I know there is a reverse light switch on the older auto boxes but I cannot find anything on...
  3. R

    TD4 3,000 rpm limiter!

    Hi, Have had my TD4 for three years with no engine problems at all. For the last two days it has developed a problem where it will not rev past 3,000 rpm. Up to 3,000 it is fine, no difference at all, It pulls really well but then it seems to feel like a misfire. It doesn't matter what gear or...
  4. R

    Better vibrations than The Beach Boys!!!

    Hi, Just had new clutch, slave and master cylinder changed in TD4. Now when the revs drop below 1000 and I accelerate the whole car vibrates like I am driving over a cattle grid! The clutch garage say that this wouldn't be anything to do with the clutch. Could the new clutch be causing this or...
  5. R

    Clutch and Flywheel?

    Hi, The clutch slave cylinder has gone on my 2002 TD4 (the dreaded pedal to floor lift up with foot problem). Whilst sorting a repair with a local Landrover workshop I asked if it would make sense to change the clutch aswell whilst it is taken apart. As it has done 60K it does makes sense to...
  6. R

    Oil & Water around oil filler cap.

    I have been to look at a 52 plate TD4. There was a small amount of oil and water (cream) mixed around the outside of the oil filler cap on the engine cover. The screen washer jet sits directly above this so I thought perhaps that this had dripped and caused the mess. I cleaned it all out and...