Has anyone being to Newark auto jumble before,was their many landrover spares. I was thinking about going to the one at the end of the month and was just wondering if it's worth the trip. Their is also one at hemswell cliff in Lincolnshire if anyone has being to that. Cheers Andy

Hi all, I know this question has being asked before but I just wanted to be absolutely sure. I've put a 300tdi into my early 90 and im connecting the fuel stop solenoid but instead of their being one connector I have 3. I understand this is the "dds" unit and the cover needs taking off and a...

hi all just after abit of advice, i've being looking through forums for the answer but cant find a definite answer. i have a 300tdi and r380 to replace my 2.5na and lt77, alot of people do the upgrade but keep the old gearbox in place. id like to fit the 300 tdi in the correct place so i wont...

Hi, is their any difference between the front and rear propshafts for a landrover 90 with a 2.5na engine and lt77 box. I'm connecting mine back up but can't remember which is which as the truck only came with one shaft which wasn't connected.

Hi,after abit of advice I've just ordered 2 discovery 300tdi calipers by accident. I wanted some defender ones. When the discovery calipers arrived they look exactly the same as my old defender ones and pads etc fit in fine. Is their any difference and will I be able to put these on my...

hi after abit of advice. Im thinking about changing my van back defender to a truck cab. Only problem is that i have a csw rear tub which i replaced a couple of years ago. The rear bulkhead slopes down in the middle. The problem is when i come to bolt the rear of the cab to the rear bulkhead it...

Hi, currently rebuilding the defender and I'm sorting the steering out but can't seem to get a nut on the bracket which goes to the box and bolts to the chassis bracket. Is this an m12 thread or is it imperial. Cheers andy

Hi guys after abit of advice, making progress with my defender restoration but I'm stumped on the steering ball joint. I've decided to renew the drop arm ball joint whilst it's on the vehicle. I've taken all the bits out but there's a collar at the top and was wondering if it should be taken out...

hi guys, im after abit of advice. half way through my first defender restoration and im wondering if the tree sliders replace the inner sill rail, do they still attatch to the rear tub and bolt to the bulkhead aswell. any help would be greatly appreciated, cheers andy

Hya guys I've had a couple of posts on here before. Currently halfway through my first defender restoration and after fitting the bulkhead I offered up he windscreen to the bolt holes and was surprised at the gap. I only offered it up, I understand there must be room to accommodate the seal but...

Hi guys first post on here, so here goes. Currently restoring a defender and have gone to put the 2.5na engine back in (previously ran spot on) but it's not starting.it's only the chassis and engine so I've got a battery rigged up to the starter etc. and one to the fuel solenoid on the pump...