is there not provision for front fog light that you can use behind the front bumper without baster sizing the console

a roof rack with a sheet of OSB will give you more room

if its a series 1 or 2 the original pin were 3BA ,was the old tank re-tapped at some time or ask the new tank supplier what thread size he used

as Datatek mentioned

when applied to plastic and rubber trim returns them to black ,require rubbing in an excess buffed off

have you tried try boiled linseed oil works great on the Freelander plastics

is this the item you are looking at https://www.johnrichardssurplus.co.uk/oil-cooler-filter-housing-water-outlet-thermostat-2-4-puma-lr005894.html

Alternator fused well I never ,Freelander with 40 plus fuses :rolleyes:

Notek nerlite some on ebay but over priced

try

they are in PNG format and rendered with MS paint so the colours do not bleed into each other unlike other formats so if you down load them and open with MS paint and zoom they should stay as is

Try

TRY

in my parts section may help

may help

may be of help

first time I have posted the image

try

no run out checks before or after the machining and a locking bolt drilled through the crank journal and then skimmed sheer skill :( let hope the crank shaft bearing regrind is as precise. love the health and safety sandals and loose clothing do not cause an issue .

if you operated the mechanism with out the glass attached the ECU will not function as it relies on the motor loading on the up and down strokes