i used my P38 for travel and have taken it all through Russia Mogolia China Kazacstan and other countries here is a video of one of the places we wen the last one i must admit i chickend out and spent 5 euros and got a tow across

0ne engine rebuilder to avoid at all costs is SIAN AUTOCENTRE LTD TA ENGINE RECONDITIONERs Sian Autocentre, Unit 7 Cypress Court, Harris way, Sunbury, TW16 7EL

No i bought a new one

this car will have a MOT all the air suspesin work s Auto Gearbox Leather seats sunroof bull bar 9 (Soft touch) Head lining replaced Rear Brake Lines replaced kept in lockup for last 4 years I think a rasonable price is 2000 Pounds

I am finally backin the UK after being locked down in Australia and will be here for a few weeks . As you know i own two 1999 Range Rovers which i put on Sorn 4 years ago and locked in my lock up. Today i started both up they started first turn of the key and pumped up the tyres . As im etting...

I have a 2008 disco 3 and need to purchase a new key fob .I have a nanocom and can program a new key but when i go to buy a new one there are 2 with different Mhz. One is 315 Mhz and th other is 423 Mhz can anyone tell me which one is the correct one for my car ? or point me in the right...

I live in Australia and the Australian army is selling of its old vehicles among them are the 6x6 wheel drive Land rovers the auction site is...

The black box solutions NANOCOM will do all the above plus flash all your ccf files

Now the next problem you are going to have is the brake pipes over the rear axle will be rusty if they have not been replaced

I had issues with my D3 and found that the egr coolant thermostat had disintegrated and parts of it were found blocking the crossover hose.

if the axle was left and hanging without air in the bag when let down the rubber on the airbag can kink and leak

is the in tank pump working?

I have a 2008 Disco 3 and the liftgate will not open. I have tried the lock unlock method and still nothing happens. The normal way of opening produces a niose like the operating solenoid is working but not releasing the catch. The same as when i press lock /unlock togeather,Is there anyway i...

I have a 2008 Disco 3 and the liftgate will not open. I have tried the lock unlock method and still nothing happens. The normal way of opening produces a niose like the operating solenoid is working but not releasing the catch. The same as when i press lock /unlock togeather,Is there anyway i...

i dont know what route you are taking but you would probably need a good offroad caravan because the roads into china are quite rugged and also getting through Russia now could be quite intresting . last time i was there the in China you had to have a guide and if you dont have room in your car...

if your just doing the chains and pump on a p38 you just need the sprocket holding tool and the cam timing tool and flywheel TDC lock pin out of that kit but you will also need a dial gague and timing kit for the VE pump

probably not as its the puller as well although you could use a hammer and drift as long as u leave the nut on loose so as not to damage the thread

if you can get hold of diagnostics check timing modulation

some countries you have to carry a breath test kit

i had problems with high gear changes and it was the green sensor on the head between 5 and 6 cylinder