Have you checked Silverlakes?? Kev

I also have that issue? Have checked, thought I had put the spring on incorrect! They were colour coded to Nearside and Offside but were installed correctly! Then checked the shocks! Again installed correctly! It is just noticeable with no kit in the back! 🤔 Kev

Has been explained in previous posts! Whole weekend trying to get the thing out, with out the us off weld! Kev

@frostythor Thanks for that! Will keep that in mind for the driver side as well, if I start having problems👍☺️ And will look at that if the weld doesn't work Kev Ps: is that from Freelander RAVE??

Freelander 1 The driveshaft! Kev

I tried that 😳 I spent 3-4 hours drilling, heating, knocking and asking nicely (and not so nice)🤣 I ran out of HSS drill bits! (3 used)On a Sunday!! Used 2 mapx bottles for heating the bloody thing! Restricted to about 6-8ins swing with the hammer! To hit the bloody thing! (That's with the...

Driveshaft! Kev

That's for practice at a later date! When I get my Arse in gear to start teaching myself from the university of Google and the college of YouTube and watch a friend in the garage? 😀👍👶 Kev

No room🥴 Kev

I will try and remember 😄 Whist trying at the weekend! The last thing on my mind was camera?? (Lots of 🤬😡🤬😡🤬🤬😡😡🤬😱🤬😡😡🤬😡) Kev

@Stanleysteamer the bottom bit is going in the bin mate! Kev

Thank 👍😀 Kev

Not worried about below, as it is being changed! Worn!! Still enough metal on the bolt head for weld! Hoping that when I do! The heat will help shift the rust in the hole🙏😳 Kev

Bolt with threaded nut! See pics on previous page😁 And its a Land Rover vehicle! With all the old nuts and bolts on it😅😂🤣 Kev

I'm hoping I have drilled enough to break the seal on the inside! 🥴🙏

One of the mysteries of life😂 I could teach you how to climb? I could teach you how to kill people (professionally)? I could teach you Trauma First Aid (see above for details 😅😂) But when it comes to 'stitching metal to metal' i shall revert back 50 years 👶. I do own the kit! Just have not...

Change it to a Td5 🤣😂 All of the above is doable by yourself! (TD5). But! As @ER1C has pointed out! If your still mobile? Most can be done by you? Or? Sell it for a run of the mill vehicle 🤔 Kev

Just waiting for call back ref welding? But drill bits are on the wish list?? I have the other side to do yet😂😭 Kev

Have a look on eBay as well! There may be a local scrappy near to you?? Kev

Will have to wait and see on that one🥴 if it goes that way? Will need a lot of HSS drill bits 😳 Kev