2009 freelander 2 steering rack How much you reckon for a new one please

Mornin Dry with sunny intervals and a breeze Bees a plenty on me sunflowers, big buggers an all Takin the 'Moonshine Truck' out for a drive today Oooh , here's one o those sunny intervals 😎 Stay busy all :)

Afternoon dullish an breezy Beef bin in oven since 10.30, just crispin it off now Very warm here (maybe cause ovens been on :D ) Rest and be holy all :)

Mornin Dry, brightening up laters Two new tyres on the Yeti 😕 Off to mates for a natter Have a good weekend all 🙂

Mornin Bright and Sunny Havin a lazy day today, might go and buy some paint Weekend looming, weeks are flashing past, soon be winter Stay focused all 🙂

Topped power steering reservoir up on FL2 a week ago Not used it until today Fluid now on minimum with no visible leaks Must be dripping into the undertray from somewhere Anyone want a cheap FL2 ffs :(

Mornin Dull an warm Early start, solicitor then a bit of shopping Going to swap my bathroom radiator from 800btu towel rail to 2000btu radiator Bathroom is grey so have to decide on paint for the rad 🤔 Sunflower now at 9 feet Stay calm all 🙂

Mornin Dull with a breeze Bit of plumbing today, no rush, had to buy a new pipe bender, lent mine to someone 🤔 :( Got led bulb out on truck, not to worry , other 59 still lit :D Meantime I think another brew is needed Stay busy all 🙂

Just put seven pin socket on and use a 13 to 7 pin adaptor when towing 13 pin

Mornin Sunny start Going for a drive in me old truck Might plumb hall radiator in today, see how I feel 🤔 Not driven FL2 for over a week, it's resting :D Stay calm all 🙂

Mornin Fresher today Nothing planned, lazy Sunday Stay happy all 🙂

It's a bungalow and I always leave the living room stat fully open because that's where the controller is. I keep hall, bedroom and bathroom at a medium heat and living room an kitchen nice and cosy. All pipes go into the attic and drop down into each room, I moved bathroom pipes to drop down...

yes, hallway , rad just needs a wet coat on now to finish

Might do this year Romanian guy next door says to eat em 🙂 (seeds)

My 15mm pipe bender doesn't do tight bends, only similar to the one in the picture that's why I thought 10mm pipe would be better, My brake pipe bender does 10mm so pipe should be hidden under the radiator, I'll paint the exposed pipe to match the wallpaper and tidy the trunking up so it...

I finished the plastering because it wasn't straight Plumber and joiner fitted skirting and radiator on same morning working together I've since replaced the architrave and now replacing skirting and tidying plumbing up

This is the wonderfull job workmen did after plastering the walls 🤔

Your right I spose I don't like compression joints on show so rather than solder a bend in I was thinking I can get a tighter bend in the micropipe so it looks neater. I also have a part roll of micro pipe in the shed and the rad needs a new valve anyway so cost wise it isn't a problem. I dont...

Problem is more than visual Old skirting was only 2" high and one pipe ran above and one along the wood Pipes need to be bended outwards to clear the skirting as they don't (and never have) sit nicely on the wall as they come down So either bend pipes to fit and leave ugly set up as is or cut...