Good job @Broke Again or @kurtjohnson10 weren't investigating it ;) :)

Hmmm, pretty tight I reckon. Is the Landy rolling? And do you have space to push it back? You could put the crane on timber, like a few decking boards. Lift the engine while pushing Landy back. Might be easier to take the bumper off :rolleyes: How did you get the engine out?

Going back a while now Dag, three or four inches if I remember correctly. This is the best angled shot I've got. Sorry, I can't remember exactly. What's your winch bumper look like? Got a picture? I think it could be tight.

You're doing some great work there Dag :cool: I didn't have to take my bumper off.

The results are in! I could see nothing with the USB boroscope :rolleyes: So, I took the rubber vac tube grommet out to give me a bigger hole to see inside. Rolled the servo around to see if anything fell in front of the hole - Nothing! But plenty of clanging :confused: Put finger in the hole...

That's a bloody good idea! And, I've got one somewhere :)

That has crossed my mind. I know it's carped, but it'll be such a shame to cut up a £190, new, shiny thing :(

LRDirect have emailed me back and, having watched and listened to the video, have offered a refund or a replacement. I've asked them to send a replacement. They said to scrap the first one. Well done LR Direct

How's he got time to inspect the hinges if he's changing the oil :rolleyes: Have they dropped so the door latch is hitting the anchor on the door pillar?

Should have put a Y joint in and vented in to both rails ;)

You're just showing off now! :) Top work that man :cool:

Yes, it causes a hell of a negative pressure. The turbo blows air something fierce! If your engine is ok, then all that's going down that vent pipe is hot air with a hint of oil fragrance in it. I ran mine in to a catch can once and the square root of sod all came out of it.

So does your cyclone vent in to the air intake before the air filter or, as in a standard 300Tdi, after? :)

Looks like Miktdish has an L plate 300Tdi though.

I've read accynina's message again and I'm now on the side of everyone having to send a PM with their address :oops::rolleyes:

I'm sure they can keep our addresses, so long as they don't share that information and take reasonable efforts to prevent it being taken. Hopefully, @accynina will clarify cos I fancy some beer mats :D

Yes, it's where the steel upstand from the outrigger secures the front of the tub to the chassis. The inertia real if the seat belt is also on those bolts so that the seat belt has a steel connection to the chassis and isn't just bolted to an ali panel. While the seat belt may still have a solid...

Does your cyclone outlet pipe not tap in to the air intake pipe between the filter and the turbo?

Yes, we're on a rolling renewal until we decide to cancel via the account upgrade section of our user menu. They way I read it was that existing members automatically get the pack of beer mats and accynina already has our address from when we first subscribed. New subscribers will have to PM her...

I've just looked at a couple of 110's on Autotrader and put the reg number and mileage in to wbac. Both offers came back less than half of the Autotrader asking price.