If it’s ‘only’ leaking when you fill up (and engine off I assume?), then to me it would suggest it’s not related to the return side, so presumably something on the fill side. There is a vent pipe, but that would only vent air out. Maybe in the main filler pipe? Wouldn’t be messing around on the...

I agree that it sounds like the immobiliser is not allowing the car to start, for whatever reason. If you have tried the obvious (new battery in fob / spare key / all fuses etc), then my next ‘easy’ check would be the actual car battery. The F2 is power-hungry and a less-than-good battery can...

Did you buy a new reservoir? There is a small filter fitted in it - if it’s not been changed for a good time, it’s worth switching it for a new one when you change the fluid.

Flush it through well with the good stuff…

Well yes - I imagine most places use fairly generic photos for thing like brake pads, rather than taking lots of individual photos of very similar-looking boxes and items.

Dunt the pedalling hurt your legs after a couple of miles?

Being road biased, they will be quieter. Be interesting to see how they get on

The AC drains out by the heat shield, near the prop tunnel.

Have to ask @MGT …

Tried the spare key?

Morning everyone. Another sunny day for ignoring today.

Google does… these ones? https://www.jgs4x4.co.uk/freelander-2-front-brake-pads-mintex/

This one…?

@DanClarke does yer mini engine look like this one…?

7 litres is too much. They take just under 6 when drained, IIRC. I think 6.8 for a dry fill. You’ll need to remove some. It’s about 1 litre between min and max on the dipstick.

I loosen from below with a flex spanner, then working from above - unscrew by hand and remove upwards. You can just get it through.

I take it out from above… loosen, let it drip, then lift out.

Thought I’d add to the ‘range’… 😉

Let me know when you are ready - I can get my old F1 code and serial number

The incorrect (red) fluid can damage the PS system. The pump is particularly fussy I believe. @Nodge68 will know more about the workings…