The saga continues, book symbol now gone and no faults showing, however, there is hardly any air coming out of the face vents. The distribution motor is working as are the blend motors, I have calibrated and tried them under the Nanocom with no issues. Both blowers are running fine. I am...

Before I take out the glovebox etc how accessible is the connector for the LH recirc motor (RHD car). This is the only fault that the Nanocom is showing. I have a good spare motor and was thinking of plugging it in and just zip tie it to something to fool the HEVAC into thinking it is ok. I know...

That's what my old girl looks like today, however, it is for the "O" rings. All done now, what a ball ache of a job!!!!

I doesn't pull dry air in, it drys the air when it is operating, it only blows cold when asked to (sometimes you have to plead with it) the temp will be at whatever you set the control to. You will sometimes find the moisture it squeezes out lying in the footwell if you dont clean the drain...

That would be Paul Bennet that did the decals

Try Craddocks, that's where I got mine, ain't cheap though, James Coleman on the P38 Facebook group may have a good used one ALR8602 or ALR8603 for the rear doors

You will alert the central scrutinizer (If ya know ya know)

Cheaper do do it yourself, I would imagine you will have a one piece. The 2 piece is easier to manipulate but doesnt look as good as the real thing.

I had my unit (Clarion) modified with the external jack, I have a mini Bluetooth adaptor so I really only use my phone or the little DAB unit I bought a while back. I stopped using the CD player years ago, it still works but as with any cd player can be a bit flaky over bumps and the proverbial...

I am sure you have already done it but I had major issues with my HK door stuff, although I had cut and soldered the larger white connector behind the LH kick panel I hadn't done the smaller one which feeds the outstation. After soldering all was a-ok

Two are even brighter..............

You do have to remove a bit of material to fit it, easy does it Homer

It does actually make visibility a lot better, as Keith says though, sometimes a tad too much, LED light is unforgiving!!!

I just put in Y connectors and tapped off of the one lamp, even colour coded the additional wires :)

The LED bulb in my reverse lights make a big difference

Bought 2 from PowerfulUK and now have one each side, there is actually an indent for one :)

Some Halfords have it too, though I never trust their stuff.......

Thanks Pete, I didn't see the highlighted this in the post, I have now adjusted my contrast so I don't miss another one!!

Have you got a link?

Thanks for the heads up Keith, from what I have read the pretensioner seat belts were fitted from 99 onwards, I assume that these would be the pyrotechnic ones?? TBH I didn't know the P38 had them