Does anybody know how to tune an lpg setup? AEB software on my v8. Thanks.

Made the recovery point, now ready for powder coat. Chamfered out the rear, filled it in then flushed it off. Done.

Hi mate, what type of tank is it? do you have any measurements and photos? Thanks.

As above guys I'm after a facelift ace block part number RVH000023. Looking to get it machined to do the pipe conversion. Thanks. Toby.

Finished off my automatic gearbox oil and strainer change. Got a friend to plasma cut this out for me from 12mm plate. This is part of my new rear recovery point i'm making. The whole tow bar and brackets have been removed ready for mods and powder coat. I've also drilled and tapped the...

So managed to get the NSF window frame installed today (between the rain!!) When it was apart I found another problem, the plastic wheel on the window regulator. I couldn't put it back together knowing that 1 of the wheels has broken in 2 and its only a matter of time before it fails...

Also sound deadened the roof.

So took it for a decent run today and had a look underneath when I got home. Seams the transfer box is leaking from what looks like the intermediate shaft to me. Bugger, probably worn oval and needs bushing.

Cheers matey.

Right another update guys. Done a few jobs today! First off was to replace the snapped handbrake cable. Sorry only remembered to photo once it was back together. But now its perfect, 3 clicks. Next up the transfer box was slighly damp from oil but not dripping so could be a build up from...

Got the rear door frame in this morning. Very happy. 1 down 3 to go!!

Well my rear door frame is back from the powder coaters and looking great. I cleaned up all the rubbers so its ready to install at the weekend, weather permitting. Also managed to source a very good condition NSF window frame ready for the same treatment. Just need to find the other 2 in...

I've managed to source a really good condition OSR door frame with the very slightest bit of rust in one spot. This is now with the powder coaters getting dipped to remove all old paint then zinc under coat with satin black topcoat. That should last many years. As I found out when doing a...

I've only had it since October but I love it so much already, I'll keep it for many many years! Cheers mate.

Another update, excuse the dirt not had chance to wash him yet. Bought some rear light guards and stainless hardware... Before... After...

Fitted a new battery last week but no pics. Also just after fitting my battery he started misfiring on LPG, found the problem after swapping some lpg injectors round. Turned out it was a free fix! All the injectors just needed a strip down and clean. Running perfectly again now I've bought...

So I went to fit and adjust the center box delete pipe but found out it was miles out and wouldn't work so I made my own. Sounds insane, only drove back from work yet so need more time with it to give my true impressions.

Thanks mate. Good luck with your build!

Cheers buddy, I'm sure I'll get a recording or 2! Yes it's really satisfying knowing it's all been done correctly. No oil leaks at all, bone dry :) For your water leak check the throttle body plate. Very common.