glad to hear you are going to have a go at it yourself.....All you have to remember is...when owning a Disco,the only tools you need are a welder and a very big hammer lol

Well thats a new one on me dave.... but then again.....a high pressure water cutter can go through 12mm steel plate like a hot knife thru butter.

hi Chris, when i replaced my front diff, i removed the front brake caliper retaing bolts and brake pipe securing bracket. Then i removed the track rod end from the hub. Then i removed the bolts that hold the swivel hub end to the axle tube,i think there is 8 bolts,and then pulled the entire hub...

If Derbyshire is in the NORTH.......I must live in Scotland...up here in Durham

thats looks as if it has been ground off with an angle grinder....If something had got into the turbo there would be chunks missing and it wound not be as uniform as what is shown in the picture. Grinding all of the fins back would stop any whistling noise if the fins were damaged but the down...

Hi Dave, Check this link out mate.....It might help www.discovery2.co.uk / Workshop :- front and Rear propshaft Dave

Hi Bigpit and welcome........Have a go at it yourself,the boot floor is only spotwelded in,drill out the spot welds and it just lifts out.If you offer a few beer tokens im sure someone will give you a hand with it. Dave

As thebiglad has said, If you have paid them to fix it and they haven't.....Take it back.

The front edge of the roofrail nearest the windscreen does not have a cover,its just finished off with sealer. Before you apply sealer to the inside, you really need to find where the water is coming in from, as if you just sealer the inside the water will just track inside the car and find...

Hi Neil, The chewing gum is just a lump of panel sealer....I would remove it. Then get someone to wet test the car with a hose pointed at the outside corner of the windscreen where your pencil is and you sit on the inside and check for water ingress. Also check the end of the roof rail on...

Hi Vernon......I would have persued that through the courts if necessary. I wouldn't have let them off with it.

Hi Mike, We all here to help each other and save ourselves a lot of garage repair bills. Don't worry about the Shouting...we all been there,its called Frustration from owning a Disco. Dave

The noise will be the thrust bearing bedding itself into the clutch cover, should go off after a couple of days Dave

Just think of it this way Neo........You could have plumped for a real shed and bought a Gaylander. lol

Where you at Neo? If its water coming in and dropping down headlining, its sunroof seals dirty and suroof drain tubes blocked.

Not for 200 brick they don't.

Hi Neo, Try adjusting rear tailgate door striker so the door closes in slightly further and check out threads on sunroof leaks.....You aint bought a Pill mate, ALL DISCO'S do it Dave

Hi Guys, Have swapped over my tow ball from standard 50mm tow ball to my ALKO extended tow ball,need for my caravans Alko hitch.Pulled caravan off driveway and attached to car on flat road outside the house. Caravan now sitting tail end down.Not good.......Need to fit drop plate so caravan...

Anything upto a 0.06A drain is acceptable. If your battery is going flat and you only have a residual drain of 0.06A....ya battery is fooked.

I was thinking 2 x 48's 1 x 48 full of beer 1 x 48 divided off so i get half for bait and another 24 cans lol