oooh ark at madam

finally sorted the bitch out,put new uj's on the front prop,nice smoothish ride now. was told it is best to change uj's on both props at the same time,is this true? only took me 2 weeks to do,not bad for me though. if i have to do the others i should have it done by about september. cheers for...

where are you and what would you want for your old shocks,cheers

do you need to ballance all 4 wheels or just the front 2 i've only had the front 2 done would it make much difference?:o

phone a friend........50/50

still cant find a deffinate answer off anyone somebody mentioned taking a shim out of the swivel pins would this cure it if the pins were causing the problems how would i check if it was the pins?

I got bigger BFG's on the steel rims, no problems with these though

top 'o' the class Ratty, BFG allterrain 245/70/16 anybody wanna buy some tyres.

ok cheers,gonna get a mechanic to ave a look and see what he thinks cheers all

not too sure on the tyre age,but he checked them and everythink was ok

had the wheel seating checked again,said everything looked ok,put the old steel rims back on had no problems(drove fine) gunna put the alloys on and get a mechanic to have a test and see what he can come up with.bast**d machine

i'll get him to check everything again to make sure they are ballanced and seated correctly cheers

i'll have to check the tyre sidewalls,they do all look ok but they might be fooked inside,2 of the tyres are slightly worn on the outside edge as though the were driven on a bus with bad tracking. cheers for all the help/advice

wire brushed the back of them got all the crap off

they are second hand but he put some tyres on them aswell(second hand)

the fitter re-ballanced them,dun know about the buckled bit,he ballanced them on the machine in his q-fit van,could he have noticed if they were buckled?

not using spacers,not too sure what theyre off

drums

yes,used alloy nuts

yes,no probs with the old steel wheels