Hi There I Like Landys, and I hope you Like my Landy. Im in west Somerset so if you need a green lane partner give me a call.

I removed my outer skin on the door top by simply opening the tab that holds it around the edge, using a screw driver. Then some players to release it from the flange. To re-apply I used a gentle touch with the hammer, to fold the tab again. It looks untidy from the inside but only if you are...

Some people put the spear wheel on the tail gate to prevent a bouncy ride, a friend put 1cm of lead over his truck bed. This was to deaden the ruining noise but improved the ride. But I leave the spear at home to save weight and running costs plus its bigger than the other wheels anyway.

Hi there I have a standard steering box for a 1977 landy. I would like to remove the wondering I get when going in a strait line. I have tightened up the box on the adjustment screw, and now have little wobble compared to other landys. However I would still like to remove the element of chance...

I've just stripped them, a lot of water fell out but mainly old oil. I think the springs broke and lodged the pawls open, judging by the bits of spring floating about. So thanks again everyone.

Yeah looking on the web, they are most like MAPs. and as there is no oil leaking out ill take this as there is no oil left. So thank you I'll try that.

just looking round I think they are MAP hubs.

I'm not shore, the only righting is 'Free' and 'Flzee' the rest is unidentifiable. but you need a spanner to look them.

I've just been and tried that and they don't turn when 4WD is engaged so that's good. but what else could it be.

Wile out on the moor yesterday my engine cut out and I had to roll back down a hill into a lay by, the problem was when I tried to get out of it. As it was muddy and steep I selected 4 wheel drive low range, but the car simply shuddered up and down in till I gave up, and so reversed out onto...