may explain

As steve2286w said

trouble is I vacuumed most of the patina on the chassis and bulkhead up

try https://www.simplycoatings.co.uk/cellulose-topcoat-aerosol-mixed-to-gloss--colour-of-your-choice-400ml-1148-p.asp and I'm sure you will find there are many with varying prices this was a quick search

If you fit a https://www.ebay.co.uk/itm/272665874287 your flasher will work, fitted one to my series 1 so I could use the front side light unit for both indicator and side light with dual amber and white LED's and holder to suit and it works with no undue load and heat through resistors and...

I would get the battery's checked by someone who has the equipment to measure the cold crank current etc and knowledge of battery's not by a counter expert or a want to be land rover mechanic is not the eco reliant on the stop start battery

If you have access to a lathe you could cut the broken end of the removed part of the stud drills pilot hole through the centre and thread it back in the hole and use it as a pilot to centre the drill when you drill the broken off stud. think the thread is BSF unsure of the size so I would...

2001 RR322 some model may vary some items shown wiring diagram not shown in connection list mainly the radio and comm's hope they are of help

you had the battery checked was this in the vehicle what equipment did they check the battery with (load tester or volt meter) and you have checked that the battery connections are secure and tight

may help

lift plastic terminal locking cam with care no great force required ,you will require a pair of F crimpers (open barrel crimpers) to replace the damaged terminal but unlike the factory crimpers you will not achieve the clamp around the seal and cable

someone's got to pay for their moon lander ,good job it's one-way trip its a wonder it did not fall apart just like their spares

did not get the telepathic images what year and model is it

Try https://www.automotiveconnectors.com/3-way-te-connectivity-ssc-female-18mm070-key-a-black.html

take a gander http://ds-restoration.blogspot.com/2019/08/ducellier-4155b-distributor-strip-down.html

the pressure switch would stop the a/c pump from destroying its self if no refrigeration liquid ,assuming petrol

when you are grounding do it by a temporary wire connected to the battery and check the earths on the instrument cluster as they will affect the stabiliser and gauges

I believe the voltage output is 10 volts to gauges but is pulsed to keep it stable at 10 volt along the lines of the old flasher relays a bimetal strip heat up break the circuit cools down and makes the circuit you can get electronic units to replace this item . you may have to set your DMM...

as Datatek look like a casting fault to me and a warranty issue. As most of the equipment used by JLR is European branded and the majority manufactured in China who are renowned for short cutting processes like there Indian owner if it was due to damage the cracks would be sharp and have a...

assuming the square type have you connected the black/red and a good earth to the two side tabs for the warning lamp