Just a few pictures of the old girl. I will upgrade all the intercooler and turbo hoses to blue silicone hoses plus new stainless steel clamps soon. You can see where I moved my turbo filter next to the power steering resovoir. Cheers. Ross Brown.

Yea as you say I can't really go wrong as they are all pretty much the same price. She has done 134k and I've only had her 6months or so and she has been off the road for Most of it as I've been doing all little jobs on her. As I said I fitted a new egr delete pipe and all the inlet manifold I...

The Brit part one seems the cheapest, would you say that would would be OK quality. Just some people have bad opinions about Brit part that's all. Cheers. Ross.

Thank you again for this really appreciate your help guys. Ross.

No worries mate. Appreciate all the help, can imagine you have loads of posts to reply too. To be honest I wondered why it had a different bolt. Yea I think I will just remove it all again must easier to work on and my luck I would end up dropping the bolt!!! Not only that I can checkother...

That was lucky you spotting that intercooler hose split, least you can sort that hey. Yea it's pretty tight the map sensor mine has a m6 10mm head on mine but same thing really. They have all that inlet manifold area and they put it there it's crazy!! Must admit it's a pain to work on the TD4...

Hi Artic2. Good morning. Definitely is map related, to be honest when I first plugged my scan gauge 2 into it I did check the gauge menu and I looked at the Map and it showed 0psi but thought maybe the scan gauge 2 didn't read it as its not a proper tester but when it started reading it...

Hi Guys. Just a quick update. I plugged my scan gauge 2 into the obd2 port today. Got the same fault code as usual P0047, Which does clear for a while. Anyway when I went onto the gauges menu looked at the Map sensor psi and its reading 0psi!! This is on tick over. So cleared the fault again...

Just used brake cleaner for the map sensor but the whole manifold I submerged it in a carbon cleaner. Will try get it out again later and check it again. Cheers. Thought maybe the boost solenoid but think it's sensor related to be honest. Cheers. Ross Brown

Hi Artic 2. Thanks for the reply. Yes mate completely removed it all and cleaned it out. Thing is it never had any fault codes before i did this! How the map sensor ever read any pressure before I don't know it was choked Solid in there. I changed all the breather system to the vortex one and...

Hi Guys. I have a 2005 TD4 SE. I recently took the inlet manifold off, intercooler out, pipes off, hoses off etc and degunked it all and fitted a Egr delete in place, plus Changed all vacuum hoses to the turbo boost solenoid to silicone. Now have her back together and running again, I tried...

Hi discool. Thanks for your quick reply :D. Yea i will take the kick plate off tomorrow and have a good look around for water stains, leaks etc. This sounds a bit stupid of me but the kick plate is that the trim under the dash board just above the pedals "black colour" or is it the trim...

Hi to all. I have a discovery 2 td5 1999 es. I have a small problem of water getting inside the vehicle on the drivers side right in the bottom right had corner of the floor ? if you put your finger at the side of the carpet between the trim you can feel water on the floor ? I had this same...

Hi to all. Just another question about my compass mirror i fitted. My writting on my mirror for the compass sometimes goes bright and dim, is this supposed to do this ? It goes dim when i put my disco in my garage eg: when it gets darker i think ? Then if you take it out in the light it gets...

Hi Halo. Well i am not to sure it will work on a series 1 discovery as the series 2 dicovery has a loom going to the mirrior with a multi plug on the end. Maybe a late 300 has ??? The loom supplies the power to the mirror, but i dont think it has anything to do with the auto dim and the...

Hi Peter. Thanks alot for that. It was perfect i put my area code in which was number 9 and done only just 1 circle and there it came the compass. And thanks for that info it will help in the future when i need it again. It should really come with a little book when you buy this i think but i...

Hi all. I have a 2004 54 discovery es premium and have just fitted a compass mirror / auto dimming to it, as the old mirror was just auto dimming only. It has the same multi plug to plug into it which i did and it all lights up when you turn the ignition to postion 2 or have the engine...

Hi. Just thought i would let you know just if any of you have this problem with the centafugal threads stripping on disco 2 td5 in the future as i am sure you will. I sorted it :D !!! Thank god. I used a helicoil. I removed the filter and cover again, removed the filter and stuffed rag...

Hi . That is a good idea about removing the cover and drilling a 8mm hole in it, and tapping out the hole in the housing to m8 . Hopefully if i cant drill the hole out to 6.8mm in the housing due to lack of space it will be ok to put a tap straight in the hole already there, it is only alloy...

HI Yes they are only m6 bolts small ! I just wanted it to be pulled down a bit tighter thats all as i am worried it may leak oil later on maybe on a long trip :confused: !! but i will go for the lock tight if the helicoil does not work. Would i be able to undo the bolt again with lock tight on...