Have Hawkeye, where is your location.

Hi All I'm thinking of fitting DRL's and I have thought it must make sense to fit a in-line fuse, what I'm not to sure about is what size to fit ( ie amps). Any ideas would be helpful. Many thanks George

Hi Hippo. Yes mate fingers crossed:D

Update This weekend 2 new wheel cylinders fitted, rear brakes stripped, checked and cleaned and complete system flushed through with new brake fluid, time spent working on brakes 1 hour to replace ABS pump and 1 hour per side on the rear brakes. Thank you Halfords never ever will I be using...

Yes tried that still wont budge, have gone for the easy option and replace wheel cylinders, also it will give me a chance to check/clean rear brakes.:mad:

Update. Both rear bleed nipples rounded by the K**b of a fitter at Halfords, have bought 2 wheel cylinders and car off road till Saturday. THANK YOU HALFORDS.

I have, wish I had not:mil59:

Have bought x2 bleed nipples off e-bay but, in the mean time a mechanic my daughter knows is popping round to see if he can crack the nipple enough to bleed the brakes.

Got round to changing the ABS pump, bleed the system only to find out that the K**b at Halfords has rounded the rear nearside bleed nipple so at the moment no brakes.:mad::mad::mad:

Rotated tyre's between showers

Hi All. Seen this on Amazon, is it the dog's nuts or should I steer clear. Happy new year to one and all. George:D:D:D

Hi Nigel Please send me your post code as I am having a Problem finding your location with my sat nav. Many thanks George

Hi Datatek Good idea never gave the ignition switch a thought. Will test and get back to you all. ps decided not to swop out instrument cluster, only the ABS pump/modulator. Wishing you all a merry xmas. George

Hi all. Have not done anything yet due to illness in family but hope to have a go over the xmas holidays. I hope you all a merry Christmas. George:D

Hi all. Further to my last post, today after finishing work I noticed that when I switched on the ignition my instrument cluster was dead, ie all gauges and e m l not working, the only warning lamps that were on was the handbrake and srs. After 3 ignition on/off's the cluster came to life and...

Hi all. I took out the instrument cluster and gave the connections a good spray of contact cleaner, I also did the same with the multiplug on the abs modulator. However when driving around today back came my 3 little friends and on checking on my Hawkeye the same fault codes were there. I...

Hi Hippo Thanks for the advice, I have another fault code reader which did not pick up the codes at all hence buying the Hawkeye, which I use as soon as the 3 amigo's raise their ugly little heads. I have cleared the codes in the past only for them to reappear. I'm thinking of taking the...

Hi Nodge Thanks for the reply, I on checking rave there is a can bus on the rear of the instrument panel so I will remove panel and check/clean and post results. Many thanks George

Hi All. I need to pick your collective brains as I am stumped, I have a 2003 1.8 Hippo and the 3 amigos every now and then pop up. I have checked and replaced the usual suspects ie brake light switch, G sensor, first gear switch on the gear box and throttle position sensor I have checked...

Hi all Thanks for all your help, will have to get out the ramps and check the tie bar on the sump as I think a engine mount may have failed. Many thanks and I will post my findings. George:5bseeya: