1. elsie

    Oil pump - prime or not

    Prime it , better safe than sorry .
  2. elsie

    More welding plate's

    Thank's all , seems like the answer to my question is no !! looks like another home made panel on the way .
  3. elsie

    Castrol GTX 15w40

    I'd want to use a 10/40 derv oil if it's low milage or 20/50 if on the higher side of life . My opinion , never touch GTX it's ****te , way to many fancy additives for the 2.5 n/a or turbo engine .
  4. elsie

    More welding plate's

    Evening all Would any one know if or where I can get the upper inner wheel arch panels from . We all know the one , it's near the seat belt mount and is a common MOT failure point on a four door , seam to remember classic rangies suffer from a similar problem . Thanks
  5. elsie

    Don't use Extreme 4x4

    Probably not the best first post I've ever read !!:dnfnoob:
  6. elsie

    Throttle housing inlet/return hoses replacement

    Any decent landy parts stockist should know what you mean , failing the , ring your local dealers parts dept and get there price AND the part number , then ring the aftermarket boys , Landranger , Craddock , paddocks ETC . Remove pipes , fit new and bleed system , as there at the top should'nt...
  7. elsie

    Alreeeet me Luuurvers!!

    Welcome to the dark side !
  8. elsie

    Head Gasket Failure etc

    He may be fishing , but it's a bloody good idea , I would .Do it once do it right !
  9. elsie

    Emissions corrected with MAF and Dizzy adjust but very lean now

    Just read the post again , I'd get a second opinion from another garage , never mind specialist , some thing isnt right with the way it's been set up . My opinoin , I only worked on them for way too long . From what you say the timing is and was 15 odd degrees out and Maf was out , either he's...
  10. elsie

    Emissions corrected with MAF and Dizzy adjust but very lean now

    If you remove the dizzy ,BE VERY CAREFUL to align and mark everything before you start !!!they are right beggers to refit without marking first . If the MAF and dizzy needed adjustment , it must have run like a pig before .
  11. elsie

    noob help. whats this under the bonnet

    excess weight , that's what . Bin it and get a proper one .!!
  12. elsie

    Part identification please?

    EP 80/90 is good . Stinks though .
  13. elsie

    Part identification please?

    Transfer box , I take it the oil really has a nasty smell ?? filler for tbox is half inch drive square plug up to left of prop shaft at rear of t box . Hope this helps .
  14. elsie

    Finally got my 90, and it blew up on route home

    It's not sweet , he's fooking nuts !! :D
  15. elsie

    Quite possibly the worst thing i have ever seen

    OH , FFS:hysterically_laughi:hysterically_laughi
  16. elsie

    Liverpool, Kirkby failed attempt

    Are we still allowed to shoot the bastards ?? I got a 12 bore and havent used it in a while !:mil36:
  17. elsie

    head gasket....

    Good to read a post that has a good ending , congrats at finding a head so close to home , rare little bugger
  18. elsie

    Starter self-fix

    I hate to say this but it looks Fubar , try a new brush pack , should sort the issue , after a good cleaning !!
  19. elsie

    what is it or does please

    as above :)
  20. elsie

    1998 S discovery V8 3.9 GS breaking

    Seats and carpets , door liners steering wheel , how much and where are you ?? thanks