At the moment the emision control is not a test that could result mot pas... because of other problems about quality of fuel and other things :).

No is no stolen StuckAgainSteve.... is a regulare car like 95% all the car in Albania....

ok i know that emisions will incrase... the sensors i will not remove...what you can advise to do with the sensors??? let them where they are or what?

There will be a problem for my engine in the future??

what???

Hi folks. I have a range rover 4.6 HSE, 1996 automatic. My catalytics are broken.... can i remove the material that is inside the catalytic and let the exhaust without catalytic

Yes i have repaired that... Could be the catalytic because i hear a sound from catalytic like is broken :)?>?????

I cleaned the conector and change the temp sensor and nothing... When engine is cold take 5-8 second to start....

OK thnx wammers i will check and tell what happend

I have to check with a computer for the value?? or the connection from sensor to ecu???

Hi folks i have a reange rover p38 4.6 automatic, and i have problem with the start of my engine when is could. The temp here is not to low. 0-15 Celsius. After i start the car i can turn of and on without a problem. I have to take 5-8 sec the starter on to turn the engine on..... If i continue...

Hi folks. I have an 4.6 engine and o want to buy a disco 2 99-2000 without engine. So can i put this kind of engine with the gearbox from P38A 1996 to a discovery 2 ??? or they have different gearbox...

Ok. I will say this to my mechanic :).

But they have diagnostic with T4 or T5 i dont remember. Then say to me there is just 1 error. Is O2 sensor and this is caused because of LPG system.

They have TestBook 4 pr 5 im not sure, but they have a diagnostic tool. The say to me there is no problem that computer show. The only error was O2 sensor that can be caused from LPG system.

Mechanic say that error of o2 is caused because of LPG

I have a O2 sensor problem. Could be this the problem????

I have changed the ECU to. I got a 4.6 and reprogramed for my 4.0. So i think that the fuel trim is reset. Or not?????

Yes i understand. If they could understand what the computer say..... :P because i send him to Land Rover Service checkked with the computer for this problem but nothing.

How can i re set the adaptions ????