Thanks. I have noticed that you can get the removal kit with thick rear bars and thin rear bars, does any one know what kit has the thick rear bar? thanks for any advise.

Thanks pal I thought I would have went to coils.

Hi guys and gals If I remove the ace can I keep the sls / air. Cheers for any replys James.

So it is in my head. cool need to try more of this. The motor befo felt better going up hill. Stew. By the way the leveling thing worked a treat M8 thank you.

Hi sierrafery I have turned it on and my stutter at 1500 to 2000 is not there any more , it may just be in my head though. But It pulls better going up hill. Stew.

Hi guys I was just going through the nanoco and found a thing in there for Gulf and under it Police does anyone know what these are. cheers Stew.

Cheers Griff That's them ordered M8. Got the sizes and ordered Stainless.

sierrafery Got the nanocom and your advice was perfect. worked a treat, all fine now. Just another Question does any body know the part numbers for the height sensor bolts? Thanks again for all the great help.

Thanks sierrafery will do.

Well guys ordered a nano evo yesterday. what measurements do you put in for the height, do you measure from the bump stops to the top of the axle? It will be with me between 5 and 10 days they say.

cheers mate will have a look

Will a foxwell do the level calibration, and what model?

Thanks mate looks like its a nanocom then cheers

Just not long got the Disco and spent £1100 on the MOT mostly welding to the chassis. Don't have the outlay for a Nanocom at £450. I'll have to save my pennies for a galvi chassis.

No problem mate, just don't want to spend £450 on a nanocm. Just got the Disco and spent £1100 on the MOT. Mainly welding will have to save a lot of pennies for a galv chassis for it.

Hi Kermit it's not the bags it' the sensors. I don't know if the one that's been replaced is mabee faulty as the level was OK before they changed the drivers side one.

Hi Kermit The one on the drivers side was changed when it was in for welding and the ride height on that side is down. I got it back yesterday and when I was checking I noticed that the rubber on the bottom of the near side one is burst.

Hi every body Defender 90 owner, I have bought a Discovery 2 and need to replace the level sensors on the air. I was looking in to this and see that it will require nanocom to reset the level. I was just wondering if there is any one close to Hamilton South Lanarkshire that could do this for me...

Would not have thought the sliders were faulty, Dixon fabrication ones, they are sided but they are the correct ones. Had a look today after work and all looks OK between the chassis and the tub , guess I'll have to live with it the way it is. thanks for your replies guys.

Hi there The door line looks fine . I would not even have noticed it if I didn't fit the tree sliders. Is there any sort of packers between the tub and the chassis that could be missing. Thanks for your reply. It may be that I just have to live with the tub rubbing in the slider on that side...