Well I am not selling the car it is the best I have out of 6

Sell what the Car or the Boost Box. I have only just bought the newer D2 and I also have a D3. I will never sell the D2 as for the D3 that is a different story

Many thanks for that explanation. My Old D2 had this box fitted from the day I bought it and when it died (Rust Chasis) at 185,000 it never had any of the issues you suggest so I am still wondering if to just fit it. I tow a lot of boats so the extra grunt would be good. Other than towing I tend...

Hello I have been thinking again about this and I can certainly sense that my newer TD5 has less omph than my Previous one with the Power Plus Box. I would like to do this as simply as possible as it is I think just plug and Play. I was wondering why you felt I need to fit the two gauges you...

Thanks for the Information. I think I am going to replace the Battery first. My LR3 is a 2008/2009 model. I cant believe it is the EGR valves as that was a different code before and it has done so few miles since they were replaced. Buying this LR3 was not the best decision I have ever made

Hello again. I have had my LR3 Go into Limp Mode again. I have a fault reader and there are just 2 codes One said stored and the other said pending. Both were the same code that is P0403 Exhaust Gas Recirculation Control Circuit. The car has only done 83K miles and about 3000 miles ago I had...

Thanks for the reply. On the old Landy it does not have those things you mention fitted... Either way I dont think I will bother to have that fitted

Hello again. I have now got some pics of the Boost device that is fitted to my Old Disco 2. This is the one I was thinking of swapping to my new to me Disco 2. Both are TD5's. Any advice appreciated Pics below Thanks

Hello Sadly my old Disco TD5 (Done 183,000 miles) failed the mot on welding at the rear.... No worries as I rushed out and bought another Disco 2 a bit newer but still a TD5. On the old one I had some sort of plug in box sitting on top of the battery that it seemed remapped something in the ECU...

On a Discovery 3 does anyone know which EGR Valve is valve A Thanks Dennis

I have a Disco 3 2.7 TDV6 2009 and I have fault Code P1335 Exhaust Gas recirculation position minimum stop performance and Code P0490 Exhaust Gas Recirculation control - Circuit High If I clear the code with my icarsoft the engine light stays of for several miles but comes on again after say 20...

Hello I have both a Disco 2 (TD5)and Disco 3 (2009) 2.7 Diesel and wanted to buy some sort of diagnostic reader. I have read that the Launch CRP123 is a good one. I don't want to pay much over £150 and was wondering which reader others feel is good for the home DIY mechanic Thanks

I have a Discovery 2 on a Y plate. I have been away and on return home the battery way almost flat on the Disco. The doors would not unlock with the fob so I Unlocked with the key, Lifted the Bonnet and charged the battery. After about a 3 hr charge of the disco the Key fob will now lock and...

Well I have a Disco 2 with running boards covered in some kind of rubber/plastic top liner. For ages when I wear shorts people have commented about the black stuff on the back of my calfs. It was not too concerned because when I have my annual bath I washed it off. Now that I am part retired I...

Being new to all this what does unlocked mean ?

I seem to have started a bit of a war here and my name is not Trump. Sorry for that. All I really want is way to put out the 3 amigos to test how long they stay off then do it again before the MOT. I know the ABS is ok, Bont care about Hill decent and also pretty certain the traction control is...

Them things are over £300 I think I will have to think again. I aint paying that sort of dosh. But thanks for the help

Boat I havnt got a boat I have got 7 boats, 5 Fletchers and 2 Ribs. Someone asked me why I had 7 boats to which the answer was because 8 would be excessive :) Dennis

On my Disco 2 the 3 amigo lights have come one but all three of the systems seem to be working. I just want to reset the lights to see if it happens again. I don't want to sped a fortune of a tool so what Diagnostic tools would you say to buy. I have found this on ebay is it any good £98...

Many thanks for all your help. I have booked it in to have the actuator replaced. £85 for the part and £45 to fit. Not cheap but reasonable I thought for the fitting. I am not going to risk messing things up for £45 by trying to do it myself. I might ask for the old part to see if I can repair...