Well. At first it was only the compressed side offside that was deflated, then air started to exhaust out of the near side. So then they were both on there arse and wouldn't Inflate.. Nanocom showed no faults and I eventually lifted it using the sls calibration function.

Ok when ever I articulate the rear axle to an extreme when offroad, the side that is compressed won't reinflate and the airbag sits on its arse. What causes this. I get the yellow dash light aswell.

K seal fixed mine.

Ok ive lifted the disco td5 2 inch and its great. Ive just started to hear a click nr the front at over 20mph. It isnt effected by braking and still clicks in neutral as long as its over 20mph, any slower and the clicking/ticking noise goes. Anyone had this before?

Look good. Ill see how i get on o and let you know

Ok cheers so just above the fogs

Hey, ive recently fitted my ome 40mm lift on my disco 2 and its great. Im going to buy 265 75 16 stts. Ive heard you need to cut the plastic front bumper. Has anyone got any pics of anyone who has done it so i know where to cut and what it looks like. Thanks, rob

Scrapping means taking another landy off the road. If your not up to it sell it to someone who is

I changed my oil pump bolt last night and in the process had to butcher my crossmember to get the sump out. all but 2 bolts snapped and i ended up grinding the tube off. Question is, do i need it on the vehicle (ill be offroading) and what is my best option for refabing one as i am getting a...

hooked up my disco td5 to a mates snap on diagnostics. i got the following: air flow circuit fault 6 air flw circuit fault 20 exhaust gas recirculation (egr) valve stuck open 91 what do these mean, i also have my egr blanked. cheers

Fantastic mate. Thanks

Ashcroft Transmissions

ok i'm lifting my disco 2 by 2 inch for more clearance and 265 75 16 tyres, i have rear bags which i'm getting 2 inch spacers for. i've read that old man emu shock and springs are the only way to go, so what duty front springs and shocks do i need if i'm keeping a stock body with no aftermarket...

Ok thanks, what does it do when you turn it to the passenger door?

Ive just looked at mine and it engages when the spigot is turned to the drivers door. To disengage do you bring it to the centre or do you turn it to the passenger door? Im not sure if ive disengaged it?

Hi, im considering lifting my td5 disco 2 inches to fit 265 75 16's does anyone know of any decent spacers to lift the rear airbags.

is that the slabs ecu. And can that be done on hawkeye or nanocom

Ok i have a td5 es that has a coil conversion on the back. What do i need exactly to get airbags again and do i need ace. I would like to lift the front on coils and put the rear on bags with 2 " spacers. Do i need ace? And what else do i need for the full assembly

Hi ive got a td5 disco, im looking for a diagnostic kit. Which is the best to use, hawkeye or nanocom evo. What are the pros n cons and why are they better than each other. Also can the hawkeye live read. Cheers

Hi, new to the scene and just got a td5 disco which is keeping me busy. Hope you lot can help me with any issues and i can give an input too! cheers