I appreciate your time and opinion on the matter but i am just asking for other opinions as i like to thoroughly research before i start messing with the motor, i wasnt my intention to upset you, my apologies. But i do believe the td5 has an antistall which only works if the throttle isnt used...

Hi guys. I have a disco with a bit of a problem. When im offroad in low box, in a low gear such as gear 2, when i hit an incline it will cut out as if it doesnt have the guts, i have been with other 200tdis that will tick over these obstacles with no revs, if i dont apply revs i will cut out...

Watts linkage. Changed mine last month. Make sutr you get lr parts not poly as they will wear out in several months.

Could you give us some pointers on how its done. Im not too sure on the location of the switch. Also my hdc worked fine, so surely it is in low as it will only work in low, unless hdc doesnt work with that switch?

Hi guys. I have a bit of a problem. When im offroad in low box, in a low gear such as gear 2, when i hit an incline it will cut out as if it doesnt have the guts, i have been with other 200tdis that will tick over these obstacles with no revs, if i dont apply revs i will cut out. Its the same if...

Bump

Hi guys, quick question. I have just cut my original bumper to the line just above the fog lights. What steering guard can i fit and can i fit one that requires an aftermarket bumper now that i have cut the original. Also can the bar at the from be removed (part no.ABY100000)

The side that is flat sits at the top

Spring compressors and blocks of wood

Front*

Tbh i would like to extend both rear ones. It is tight to the point of snapping if it wasnt for the plug. https://www.expeditionexchange.com/slickrockfab/ do from cables definitely work for the rear?

The hub cable to the loom cable. Its a push fit which keeps popping out. I wouldnt know were to start with getting the right cable.

Hi there, my offside rear abs cable keeps popping out on articulation, this is due to the 2inch lift. Does anyone know of how i can extend them. The american ones are 90 pounds before shipping so i would prefer to avoid that option.

So what does the switch look like and were is it exactly?

ok thanks for the explanation.

So how is it driveable in low as its very hard to use the throttle smoothly. I thought it was more to do with how the throttle pedal itself responds, not fueling?

Ok, when im in low box the throttle is exremely responsive to the point of when i go over a speed bump it will jerk me forward. When im in high box it takes a lot of throttle to rev. So ive plugged my nanocom in and it says in in low when im actually in high and high when im in low. I believe...

Bump

The height sensors are about 5 week old, just changed them.

.