I need a replacement plate thats above the rear mud flap, tried ebay and found them for series 1. Where does these for a series 2 discovery ?

I'm near to Durham, has anyone got a unit to hand ? :rolleyes:

Ok i fitted Electric seats with correct harness, I now need to activate these in the BCU. Where's best to get the interface to enable myself to do this or do i need to go to a main dealer ???

Hi, if any doors or the tailgate is open the suspension stops firing / moving.

Yes P38, all height settings work fine, problem is only when i get out and shut all the doors then i hear a valve pulsing and all 4 corners lower... system is completely empty of air when i return to the car. I replaced all 4 air springs while i was on doing the radius bushes. Checked for leaks...

Ok just removed both front radius arms for new bushes to be fitted and now the cars back together noticed that after i get out one of the air solonoids keeps firing until the susspension is right down and completely empty. Didn't have this problem before can anyone advise whats happened and how...

Does anyone know if parts are available for a type D linkage off a manual R380 gearbox. Landrover only list a complete top unit for 500 but all i need is the two springloaded ball bearings units and a new shaft ??

I've lost all my gears and the stick just doesn't seem to feel connected to anything. Been advised by ashcroft transmissions that this is a broken pin at the end of the selector shaft above the gearbox. Has anyone done one of these before?

I've installed a Webasto Heater to my P38 Diesel but need to know which is the Supply pipe coming from the fuel tank underneath, can anyone advise ? (there's two pipes next to one another with connections to the body fuel lines)

Has anyone got a Webasto heater Fitted to their P38 Diesel ?

My 1998 2.5 DT won't easierly go in reverse as in it's very hard to find, also the gear stick in general feels very sloppy and all over the place when trying to put it in any other gear too. My car had a brand new gearbox fitted not long before i bought it. Can anyone please advise what may be...

Does anyone know which socket in the ECU I would plug a Chip Upgrade into for a DHSE or DT?

However, now the supermarkets have got wise, and the price has rocketed. ...yes and you'd think they'd keep prices lower to get more sales in veg oil, but no priced themselves silly. 6 months ago £1.88 3 Litres at Asda now £3.49.

..well i wouldn't risk fitting the wrong size O Rings, not worth it. I can only say you've been lucky that you've no leaks for 5 years. Correct Replacements from Landrover are still 22mm.

Anyone have a diagram of the fan belt routing for a P38 DT without aircon ?

My P38 tailgate solonoid is buzzing continuously, if i lock the doors it stops. Yet when i unlock the doors the top tailgate pops open and the solonoid buzz's again. Do I need a new one or is this a faulty swicth ?

No 22mm inside diameter 2.5mm thickness - RangeRovers.net :: View topic - Heater o-ring replacement full procedure & new shortcuts

Ok go to Product Information » Diesel Power Tuning - Specialists in Diesel Tuning, Diesel Power and Diesel Performance using the DPT Tuning Box select make, model etc and it shows the DT has 113BHP and the DSE has 136.

Ok, been looking into chip box's and noticed that the DSE standard power is higher than the DT and even chipping the both DSE and DT the DSE still has more BHP...so what's the difference with the DSE Engine?

Anyone fitted an L322 front to a P38 ?