Does anyone have a drawing of the flywheel housing or the gearbox bell housing on a 300 tdi showing dia and hole positions on flange face ?

No haven't got lights, indicators are just tdi ones.

Can anyone tell me how to fit td5 headlight surrounds to my 200tdi wings ? Indicator holes look as if they need cutting, is there a template ?

Great Thankyou.

I'm in need of the two new gaitors that fit on the selector housing ontop of the gearbox. Does anyone know part numbers and where to source these from please ?

looking at my parts i have available, if i remove a section of material from my 300tdi discovery cross member either side to allow it to fit to the three fixing point on the chassis. I should be able to fit the 300tdi box using discovery mounts, and everything will line up. Gear Selector top...

Has anyone got all the measurements of the gearbox adaptor please so I can get my local machine shop to make one.

From what I understand my 110 was a 200tdi, fitting lt77 mounts to the R380 box gets it in the correct place for diffs and no mods to seat box or tunnel. Engine 300 tdi sits 2" back and needs mounts moving on chassis. Bare in mind I've never had a defender before and bought mine as a rolling...

Yeh, I have the 300tdi gearbox cross member but looking at my measurements the props won't reach. That's if I'm looking at it right !!

Thanks for the pics, I'd best get the engine and offered in and see how everything lines up.

Did the props line up or did you have to move the cross member? Have you any picks what you did ? Cheers

I've a discovery 300tdi engine and gearbox, looking at using the LT77 gearbox mounts to fit the gear box in and move the position of the engine mounts. I'm in need of the gearbox plates that the rubber mounts fasten to, chassis mounts is all I have.

I'm looking at putting a r380 gearbox in my defender using Lt77 mounts. Has anyone a picture showing the mounts and gearbox offered into a chassis ?

Hi, Nice project ! Wondering what rating springs would be required for the weight of a 6BTA Cummins ?

Still unclear to what the bracket I've circled actually locates onto the door.

Ok cheers.

Can someone tell me what on the rear door engages to this part please ????

A daft one, where do I get replacement metal clips that the indicators screw into ??

Ok. So what do I need to do to make these fit, is it just a hole to drill ?

Thanks that helps.