Hello everyone, I'm getting more and more involved with my car. I would like to renew it step by step. Can someone please tell me what this is and how I can change it? and where to buy it? Thank you!

great, thanks. yes, now it fits. I was also confused by the subtitle:

...I have now seen the video by chance. Can someone please jump to the 5:51 minute point - is he talking about asbestos? and especially in what context? I can't understand it properly. Thank you.

this is what it looks like on the passenger side. i'm relieved. The test was as follows. First pour water in areas above the car - no water in the car. Then roof - no water... Finally, of course, at full strength - no water in the footwell. No drops of water on the bodywork - everything dry...

Thanks for the feedback. I also wanted to order sika now. May I ask what number you used? I wanted to buy Sika 529. Or does 522 fit better? Thank you

So, after about 2 hours I checked it again. And sure enough, there are 2 drops of water - see picture. But I am convinced that this is not the problem. I tried to trace where the 2 drops are coming from but I can't - everything around it is dry. It's magical. There is not a drop of water in...

Would you describe my case as hopeless or is it still possible? I can't weld.

puhh, spent the morning in the garage. I'm a little disillusioned. Started with the driver's side. Strips off, carpet up = shock! But now I'm relaxed again. I've already started removing the rust. Then I doused the windshield with lots of water (water hose). Nothing! Not a single drop to be...

Can I exclude the roof drains from my problem? I don't know where they are and how to check them. I'll get started right away. The water problem is my top priority.

please share the link.

ohh, the expansion is complicated. You have to remove the window frame. Ok, I'll start by pouring water through the grille tomorrow. If it comes out through the plastic, then I'll have to do it. Thank you!

Thank you, I will remove the scuttle panel tomorrow and then pour water over it. I wanted to remove it months ago because the foam is completely gone. By the way, can I just use any foam (water-permeable)?

where is the best place to order spare parts?

...puhh £499.09 https://parts.jaguarlandroverclassic.com/stc2784-accumulator-antilock-brakes.html the prices are very different...

...looks like this: Can you recognize anything? and which manufacturer can you recommend for the new device?

Hello everyone, At the moment my car is against me. I was at the car wash today. When I opened the driver's door, I saw water on the plastic - see photo. then i checked the carpet - it is completely wet (underside) - on both sides. Apparently for months. In the second photo I discovered the hose...

I'll ask again anyway: it can't be the switch, or should I buy a new one and replace it? and yes, I will take a look at nanocom and probably buy it.

that's right, it runs every time you press the brake pedal.

Many thanks for your support. I would like to describe the process once again, as it can't really be a coincidence. I've only had the EAS problem so far - that's solved. Then the car was absolutely faultless. I was then informed that my rear brake light was permanently on - at this point I also...

...the lights don't go out. Started the engine, waited until the pump goes out (slight buzzing stops). Then drove off for a long time without braking - nothing happens, the TC and ABS lights stay on. Could it be that I have destroyed it by stepping too hard on the brakes? When I changed the...