great. thank you very much! for me, preparation is always the most important thing. One last question: where can I find the spare parts...

Thank you. How do I have to imagine this? Screw out (red) - green downwards (probably won't work) - so remove blue? and where can I find the technical drawing? I have been searching for a long time. Thank you!

Hello everyone, something new every day. I have too much leeway here - is it complicated to change the buffer? I haven't found it here...

that would be ideal!

But it's also about loosening the screw. The disc rotates. Now I've seen another video and he says that the motor can ‘brake’ the disc - so that it doesn't turn. How does that work?

I took a closer look at it. It's the crank seal. That's what I'm going to do next. It doesn't seem complicated. I watched this video: The only thing I'm missing is the special tool to tighten the bolt to 270NW. Is there anywhere to get it or alternatives? Thanks!

So, I finished today. Sealed everything. I hope the water stops coming in. I didn't use foam - I used aluminum. I painted it black beforehand. Thanks for the great support here! Will report back.

sorry but I'm currently working very intensively on my car and that's why I have all these questions. There is an oil leak on the engine. Marked in red - it then spreads (marked in green). What could it be? I hope nothing complicated. Thank you!

Thank you! I bought deionised water - 5 liters 2 EUR. I filled it in, started the engine but not a drop of water is lost. There seems to be no leak, hmm...

4,2mm x 19 mm?

Started the extension today. The paneling is off. It was very difficult as all the screws are totally rusted. 2 were also torn off. I drilled them out. At this point the question: what are these screws and where can I look and buy them? The holder of the windshield wiper was also rusted. I...

ok, i'll fill it with water. Does it have to be distilled water or water from the tap? and another thing, is there no sensor in the display - if there is no water?

I can't find the “simple/earlier” coolant - does anyone have a link for me?

...it has been ignored for years...

am i doing something wrong if i order the mannol? That is the best available.

Hello everyone, I have just noticed that I have run out of cooling water. I have a P38 with Bosch. Can I use this? 4012 MANNOL Antifreeze AF12+ G12+ ?

...ok, I'm a little disappointed. I derusted everything, neutralized rust and painted it. the carpets were dry. now the car has been standing in the rain for 2 days - without moving it and the carpet on the driver's side is wet again. Everything is dry on the passenger side. Now I have found...

...just to be on the safe side: I don't know what was used before. Can I just top up? I wanted to buy this: LIQUI MOLY Brake Fluid DOT 4 | 1 L | Specifications/approvals: FMVSS 116 DOT 3/116 DOT 4 | ISO 4925 Class 3/4925 Class 4 | SAE J 1703/J 1704 Thanks!

Thank you for your support. I changed it today - went great! Thank you!

Thanks, Part No ANR2556? Is it fixed with a screw? through the hole?