yup! This one cant reach the starter.

White with red I guess.... the red has probably faded.

Anyone?

Lol!

I found a wire resting on the bell housing of my car but couldn't find where it goes. I did remove the airbox and all to look properly but to no luck. Seems like it came out of a grip since it has the seal on it. Would anyone know where it goes? The color is pale white with a maroon stripe on...

Bump....

Did remove carbon and they were genuine washers.

Bump!!

Bump!

As compared to yours mine went on very tight. I sanded the nozzles with a very fine sand paper so as to get rid of the carbon and then still wouldn't go on. Then I used a small socket and kept on tapping them I drove them to the end and that socket left a round scratch on all of them, deeper...

Bump....anyone!

I recently replaced the O rings and the injector seals on my td5 and I suspect that one or two are leaking since it takes longer to start and fuel pump gargles a little. The tight fit of the washers onto the injectors came as a surprise to me and I did scratch them a little while fitting...

Thanks for the details... I will be replacing it tomorrow!

I want to replace it but I wanna make sure it is there which I have, asked a friend to check it on microcat for my chassis number and my car does use it!

lol... yes thats one way to do it but its all nice and sealed from factory I don't really wanna open it up without reason.

Okay so I cleaned the ends of my 2001 TD5 Defender 110 with WD 40 and fine sand paper. It was on the bulkhead behind the right front wheel above the prop shaft cross. I also added two more straps, one from engine block to frame and one from frame to bulk head. Things seem to have improved...

Well yes that's how my filter looks but how to know for sure??

So these parts are a waste? My 2001 110 TD5 defender has no such thing?

Thanks for the reply Ratty! I used a socket to tap them into place but the socket did leave a slight mark on each washer; hopefully its all good! When I was researching the delayed starting issue I read about these parts(pics enclosed) and ordered them now I can't recall where these go and...

Thats not available here... what else can I use... can I use electrical contact cleaner tp clean ecu? Its a defender.