What are they retailing for nowadays? I always thought the reg. of the vehicle went off the vin number stamped on the chassis...so how do people get around this when they purchase replacement chassis'? I'd like to get my own chassis acid dipped and galv'd if anything, its very tidy at the...

So after reading through what needs taking apart a couple of times, its definitely something im capable of, and hope to start the big stripdown after the weekend :) Upon refitting the bulkhead, going to fit sound deadening. See if I cant dull out the diesel engine a little bit. As far as the...

Continuous while the winch is operating. Got the day off work today so a stripdown could be in order

Its at the point where myself and the passenger get wet feet during the rain, not ideal. It'll need a clutch sometime this year, will the bulkhead being out give decent access to the bellhousing? Tottot, i read sonewhere on here that galv doesn't take unless the chassis is all bare clean metal...

Has 2 brand new odyssey (spelling?) Dry cell batteries, a master switch on the dash and an in/out rocker switch in there as well as the remote. Now you say it, it is more of a clack but its fairly quiet. Can hear it with the window open and engine running, just about.

Done a couple of searches on this, only seem to find threads on removing the bulkhead behind the seats... Basically how much of a job is it? Want to pull it out to weld up some rot, then strip back and give it a nice few coats of paint. Im a dab hand with a set of spanners But I need to know...

Been using the 90 today winching logs out of a dingle...and my winch seems to be making lots of noises it didn't before. Haven't done any serious winching with it since owning either. Its a Warn 9.5xp, with 100ft of plasma rope on. When winching in or out, at any load it makes a clicking...

Im having the same problem. Only picks up radio reception on the top of a big hill! Im looking to try and fit a cb aerial but without the big spring on the bottom. Having a hard time finding one though

I switched the front and rears earlier this week. the front now sits up a lot more than before, and the rear is sitting down just a touch. Popped over to the neighbouring farm to grab some measurements from their standard defender, Im toying with getting a brand new standard suspension kit...

What spring setups are you using, lifted or otherwise?

Still want this ;) don't forget me!

It seems to do it just at this speed. Exactly 20mph on 2nd and 30mph in 3rd. And only on a decent pitch of a hill. i havent done filters yet, i must get some.

How would i tell? Airline in the pipe to the tank?

Got round to fitting the new bearmach lift pump on saturday, problem is still evident

I could send one to collect if you wrap?

Do they include runners/rails/whatever they are that bolt to the landy? I'll take the lesser ripped one if you'll post :)

Would it not be a good idea to do a similar thing to this on the rear of the pick up cab (under the back windows and behind the seats) and under the seats, down to the footwells and on the tunnel? I cant ever see my landy going in that depth of water/mud and think it would be a good addition...

Id then have hd's on the front and saggy ones on the rear.?

I have a 90 200tdi, and its got a horrible nosedive situation going on with the suspension. The springs are blue, the rears are HD and possibly +2", the fronts don't seem to be HD and the front sits a lot lower that the rear. I have a D44 winch bumper, warn 9.5xp and steering guard in the...

Do you have General grabber MT's? I didn't rate mine a great deal at Hadley when I went. Although it was bloody wet and everyone seemed to be struggling