Hiya, Within the first week of owning my 2004 td4 sport I put a set of 4 steelies on with goodyear tyres which I bought on ebay for £30. My alloys are now wrapped up all snug in the garage. The wide tyres on the alloys tend to spin on top of the mud and soon get knocked off the rim and deflate...

Does anyone perchance know what chassis numbers the freelander became ODBII compliant please? I know the years are 2000 for petrol and 2004 for TD4 but mine is an early 2004 TD4 and sods law will dictate that if I spend £120 on some scanning equipment my TD4 will not be ODBII compliant cos I...

If you have electrical folding mirrors it says so on the switch with a pic of a mirror folding on the knob.

Thanks Brian :-)

Hi, has anyone mounted a winch to the front of their Freelander, If so what did you use to mount it on ? Ta Paul

Thanks to Ben at Brit-car I have managed to get 4 genuine spacers. Product Code: DXB500250PMA Britcar (UK) Ltd > DXB500250PMA BEZEL After market sensors seem to fit them but have not fitted them to the freelander yet.

Hi, I too was surprised at the lack of external temp gauge and also fuel computer on a "modern" vehicle. I have purchased a Halfords gauge and stuck it over the pathetic standard clock. As the gauge has a silver case it goes well with my sport "champagne" dash.Has clock as well as external...

I spent the best part of an afternoon on it and could not drop it down enough to get at and remove the fuel pipes, mounting bolts were seized and the rivets that held one of the mounting brackets on had corroded off, by the time I got that lot sorted it started getting dark so I gave up and put...

Many Thanks for your efforts TD John, will now see if Land Rover will sell me some without the rest of the reversing kit ! Cheers Paul

yep, thats what I was wondering. The ones I have bought have an angled sensor but on testing before fitting I found the angle was not acute enough. They need a pod or well slanted spacer. Interested how Land Rover have overcome this !

Hiya, bought a generic reversing sensor kit for my 2004 sport but when I came to fit it this aft I found that the rear bumper is not vertical and if I fit them to it they will point down somewhat and false trigger. Has anyone overcome this problem? what does the factory fit look like for...

Interesting Post gents, I note that the lifter kit ads state that inner wing mods are needed, how much butchery is required please and its just to the plastic inner wheel arch ? Thanks Paul

Many Thanks, downloading as I type, tried the 2001 first but it asked for a "dongle" but notice the 2009 seems to have a "fix" Cheers Paul

Does anyone know if it is possible to get a parts catalogue for a 2004 3dr freelander ? A typical land rover version that shows part numbers for every nut and bolt ! Ta Paul

thanks Mike will do, now to find someone who will sell me some ! Ta Paul

Your a Star Mike, thanks for your efforts ! do the "holes" look like this pic ? mine have been pulled out so there are four 1/2 square holes in the back of the seat!

wow thanks for the quick reply! what do the fixings on the seat look like please ? the bits those fasteners "plug" into ? I only have 4 square holes ! Ta paul

Hi, Can anyone help please? I wish to fit one of those Land Rover bags that fix to the rear of the rear seat and store the targa top. I now have a bag but the seat does not have any fixings only 4 square holes. What do the fixings look like please that go in the seat holes? Thanks Paul

Great Post thanks. Just changed my Air, turbo and crankcase filters, put it all back together started the td4, all seemed ok, turned it off only to hear the fan noise and see fumes/ condensation coming from under the engine, immediate panic as I thought I had caused a fault and the thing was...

Thanks for the info, put one on my Christmas list :)