Nope, how would I do that? JB

Hi all, My 300TDi auto has been a real pain to start over the past few weeks, seemed not to be firing on all 4 and ran rough for a little while. Once warm it seemd fine (although a little down on power). Tried to start it tonight, and it would only fire on 2 or 3 pots, and when it did start...

Ooops! Sorry :) 2.5 TDi (300)

OK, short history first.... Over the winter I used the Disco to work (around 12 miles) after about 1/2 way I would have expected to get some heat from the heater, but nothing, even though the guage reading was around 1/3. After stopping at junctions for a short while, the guage would creep up...

Hi, I would have done the job myself as I normally do, but the guy had a lift etc, etc so I thought I'd give my old bones a rest :D Looks like I might just have to get under there anyhow :confused: Thanks for the input. JB

Hi Battenberg, Thanks for the input, but this is not a screeching it is definitely a regular 'tinkling' type sound. It sounds like the noise you would get if there was something catching on the propshaft for example. If you imagine a cycle wheel with something metal catching on the spokes it's...

Hi all, Our Disco 200TDi Auto failed it's MOT earlier in the year on a failed handbrake cable. It was replaced by the garage and seems to work fine, but I noticed after a coupple of weeks that there was a light metallic 'clinking' sound from under the car. As time went on it has got a little...

Hi all, I need to have 3 tyres on one Disco swapped with 3 on another. If there is anyone out there who may know of someone in the Swindon area that could do this for me I would be grateful. Many thanks. JB

We have just recently acquired a 300 Disco 2.5TDi Auto. A couple of times it has seemed to have no response to the throttle! It occurs when I am stopped, then select 'D' and put my foot down, the engine does not respond and there appears to be no drive. Anyone out there got any ideas I would be...

Hi, Can anyone give me some advice? The problem is that the aux belt snapped and took out the electrical cable from the Air Con pump. It is really close to the casing and I don't think I can solder anything on to what is left. Is it possible to remove the front cover of the pump to replace the...

That's my first move, but I still think there is a burning type smell when I put the fan on, or maybe I'm just paranoid? Haven't tried it since just in case.

Sod's Law that when you really need it it will pack-in!! Lovely cold morning, turn on the heater fan and..........nothing, zip, nada!! Actually, I lie, there is a rather strange smell of the electrical kind. The fan has always squeaked but was gradually getting worse. I am guessing that...