i really like what you've done with this, kind of what i have in mind for my 300tdi i have a few questions how did you fit the D2 interior? how did you fit the rear lights? did you have them cut and welded? regards Sam

its your spider, i had this happen to me The Definitive Alarm Spider Post - Land Rover Technical Archive - LR4x4 - The Land Rover Forum

whats causing the indicators not to flash when i lock the car? is there any actual fix apart from ignoring it? cheers for the help

it was me and my dad who repaired the panel, but only temporarily until i can get a set of new inner wings and panels ill let the pictures do the talking you can see here the inner wing has crumpled and dropped, losing about an inch towards the bulkhead and about an inch...

hey guys in the snow recently I plowed straight into a lamppost i need a new inner wing as it took the brunt force, new headlight and indicator, grill, bumper, bonnet and wing now whenever i switch on my headlights the hazards turn on and i cant switch them off unless i turn the...

Appreciate your reply, but I don't need the part numbers, as ill be buying led bulbs I need to know the bulbs, are they T5? how many of these? is that the only bulb type?

oh right so what's the clock bulb too people? id love to go and check but my disco is not with me!

eh?

:doh: forgot what im driving! anyway, with the spider bypassed she now starts and runs, stop solenoid is fine etc

Can anyone tell me exactly what bulbs are in the dash speedo etc IIRC there are 8 bulbs... I cant find any information, I assume a couple of 501s and a few T5's? How many bulbs do I need? and what bulbs please including the heater bulb

Following this topic: http://www.landyzone.co.uk/lz/f8/300tdi-wont-start-help-211868.html I tried to resolder all the Spider connections, but in the end gave up and bypassed the unit excuse the bin man gloves ;) my problem now is although the truck starts, the glow plugs aren't...

well after an hour routing around again, and resoldering the SPIDER with a bogmonster bypass trick the starter now turns over! but the glow plug lights still arent lighting and the fuel pump still isnt priming so it wont start, any ideas? we rang an auto electrician and he was saying...

Cheers guys Elring fitted now! the quality is much better than what I had before!

Hi guys, i've been repairing the head gasket on my 300tdi for a couple days now, the engine is all fixed and back together with a new head etc. it didn't start before the head blew so I assumed it must have been a starter issue as it would bump start and run normally. I got my starter...

Hi all, I bought a recon head and all gaskets off of the bay, but upon closer inspection the Bearmach head gasket looks a little ropey to me... the silicone gasket looks like it wont seal quite properly, is this just me? or does this gasket need sending back? Any help is much...

Hi guys, I recently purchased my first Landy first thing I did was remove those horrible vinyl's on the lower section its a 98 disco 300tdi and was what i thought was great condition, after the first week the HG unfortunately showed its first signs of going, the header tank was...