Mine, fitted last year. £96 for the bar. Please note you need to fit it to the front bar behind the bumper, I had only 4 of the 6 mounting holes for some reason and the 4 were too large for the brass lugs, I gave the job to my local garage. They hate me now! :D haha. It did however save my...

While looking on youtube, i found this. The view from the other side of that course, with a suspicious looking freeby parked up. Land Rover Off Road Capabilities - YouTube Would appear traction control does help out.

I got new LR drop links for my mot last month, the right hand side is knocking already. defective part? The left side is fine. It's the join at the bottom that goes to the wheel that seems to be where the problem is.

Just off the phone to them, spoke to ken with regards to a whine, He believes that my ird or main shaft on the gearbox is likely to be at fault. Nice to speak to people with decent knowledge of the parts and decent customer service, will be asking for my parts to be sent there to be worked...

Mine is fecked then, shall price up a slave cylinder change, then cry, then get it done and cry a bit more. haha.

Right, On monday, i got my master cylinder changed for a genuine LR parts, to hopefully solve my clutch issue of no pressure in the pedal and unable to change gear. However, while i can now change gears and drive the car, the pedal is still very soft with no pressure till almost the end and...

Look forward to seeing if this sorted your whine, i have a similar whine so if it sorts yours, then i'll buy the bearings as well.

Hi folks, Is there a way to test the td4 master cylinder to see if it is defective? Mine is likely to be faulty, but it less than 2 years old an has done 18k. The RAC and local garage believe it to be faulty as there is lack of pressure in the clutch system for the first inch or so of...

RAC just left, the fluid in the system is at the brim so there is no leakage of fluid. However, there is a lack of pressure for the first inch or so of travel so he thinks the master cylinder is at fault. Possible piston sticking so not getting full travel on pedel. Ive also got a knock...

Hi singvogel, the synergy2 is a remap right? If so I'm already running a twisted performance one. I just need the new maf sensor. Who is the person who sells them? Thanks for your help.

Where did you get your MAF sensor from? Need a new one for mine. Shall invest in some of the tools people have spoke about as well.

So how much is a new flywheel then, is it typical LR prices of pick a number, times it by 5 and add a 0 to the end, plus vat? I thought i wouldnt get any issues from the system for years, it hasnt even done 2 years.

Thanks for the reply, i didnt get the flywheel replaced when the clutch was renewed, the garage said it was fine. Could the flywheel be the cause of it? Local garage i use is £30+vat labour but the gearbox in/out is a 7 hour job so im looking at £240+vat before i change a single part...

04 td4 is showing clutch issues, at low speeds in 1st or reverse there is a judder and today it wouldnt select 3rd gear unless stuck into 4th first then brought forward. It got a replacement slave and master cylinder and new clutch fitted at 51k, it's now got 69k on the clock. The parts were...

Yes, easily, if on motorways, i recon i could do it on 2 tanks of fuel if i stick to 60. Best range from a tank is 585 and that included town driving so motorway only would be 650 i recon. Yes my freeby has went wrong, but it has never left me stranded at the side of the road. It was always...

Mine has passed 2 mots with the EGR blanking kit in place. My mot garage know it's blanked but have not said it would fail because of it. Will never remove it. Such a great bit of kit.

Bump of old topic as its relevant to me. How are you getting on with the new bearings bedding in? Any issues with them? Mine are getting louder but have not failed like the originals have, now getting ready to replace and I'm just wanting to be 100% sure I get good ones that will last.

So we have a few people with the same issues... Has everyone with the units got them fitted in the last year as they have the 1 year guarantee, not sure how that will go if the ones a duff. Would you get a replacement duff unit again?

Please be aware though that you need to stop and corner, take it easy and brake gently in plenty of time. I also pull over and let the tail gaiters past. I'm not risking my car and insurance prices and I feel its safer to let them have their smash infront of me, than into me. Enjoy though...

I agree, 8 inches of snow is fine to drive in before i chicken out, i recon the car could get through but the roads to my work are lonely and unclassed so if i get stuck, it's a long walk to get help. If you both are having issues with the same part, that does throw up questions on the quality...