Thank You copy and paste seems to work fine.

Well Thought long and hard about this but due to recent Health reasons have decided to sell my recently finished rebuild. Not something I really want to do but wont be really droving it much so want someone to get some fun out of it. I suppose some people who have watched and helped me through...

No Problem if you need anymore just let me know.

If you need more let me know. Not sure whats going on here but when I try to upload pics I am getting this message, never happened before. will try again later. The following error occurred: You do not have permission to view this page or perform this action.

Yes will do that today, not sure where you mean , is it from collar at top of tube to bottom of stick down in the sump ?

Sorry just seen this, been busy trying to solve other bloddy niggly problems, Anyway think its sorted I fitted a new voltage regulator as the one I was using was an old second hand one, tested again idling and needle only went about 3/4 way up, after about 45 mins, give it a run out and needle...

Not sure what that is but will ask the guy I sold it to if it is available

Sorry no , which bit do you need

Radiator is new, there is about 10 degrees difference from top to bottom, ie if top is about 60 then bottom is around 50.

Tried running it tonight Without NO thermostat but just the same temperature rising all the way up to 90s. Does this rule anything out or give anyone more clues as to what the problem can be ?

Well please forgive me but now I do not think it is fan or water pump as it does seem to be circulating the water as it should. Tried again this morning with tap closed but although I didnt let it get to hot it was rising as before. Then tried again later with burping the system with one of...

Will give it a go but To be honest I have tried everything as this was brought up a while ago , Now when I bought the engine it had been fully rebuilt by the MOD BUT the front 8 blade 24 volt fan was damaged ie bent to f!!ck, was not bothered as plan was to change everything to 12 volt, now I...

This is tap that runs in to heater in cab, do you mean turn this off and try /

Have checked stat and it does open as it should, the readings for it were on the housing. not sure what my cap is but here is pic.

After about half hour temp gauge goes up to red , Not loosing any water, heaters work. brand new rad thermostat and all hoses. Water does not seem to be running through the top hose , then again I could be wrong. not sure if there is Air in it or if there is how to flush it out. Started it up...

Will check to see what cap I have

Went for the freebies for the mean time, might get a new set after the new year,

Mine is 2a there is a tap in engine bay connected to the hoses going in and out of heater, it is turned on at the moment. Will try temp readings with gun tomorrow at what Temp should I be getting in to the Danger zone, so I know when to turn it off ?