Thanks I'll have a look in the morning , I've already switched the bullet connectors from the black red (no power) to the blue white in front of the radiator and headlights did come on when I put full beam on but this surely only confirms that the black/ red wire doesn't however power to it ...

Based in south Birmingham

Just realised that won't work because power feed only goes to white/blue when full beams are on

Ok the blue/white wire that feeds the full beam is live , can I split the blue/white so that it also feeds the headlights , I'm assuming that will work? You only ever use full beam when headlights are on anyway

Still nothing , annoying as hell now , I've tried everything suggested , any other ideas please ? Bulbs ok , fuses seem ok , switch is ok because I've switched spades for dim/full beam and the full beam works on headlight spade , its as simple as there not being a live feed to the bulbs , is...

Just had another look I think bridging the wires just put full beam on so that doesn't solved the issue , would 1 bulb going stop both headlights working , the full beam/headlights are on one bulb , getting frustrated now , I can check bulbs , any advice on how to check the switch

I've just removed the steering column (I've had a new indicator stalk about 18 months ago ) I notice that if I touch the two blue wires at the top of the stalk everything works correctly , 1 is blue and 1 is blue/red does that mean a new stalk or should these wires be connected somewhere else ...

Any reason why all electrics still work without fuses?

Yeah I'll have a proper look tommorow in the hrs daylight that we seem to be getting recently , to be honest there are two wires that should be taped off and aren't , I think they were for spotlights and they may have hit one of the many spanners and nuts and bolts rolling around , there...

I think that I'm going to have a look at the the bullet connectors behind the grill , I think I had an issue with them a few years back , ill have a look in the morning

Just had had another look and realised full beam comes on on one of the lights when sidelights are on but if you switch to headlights on (and they don't come on )and pull full beam then full beam comes on on both ?

Treated myself to drive in the Series 3 last week , spark on dash shelf just above gearstick where hazard lights/fog light switch have been fitted ( not by me , a good while back) , since then the headlights are not working however everything else is including full beam . No obvious burnt...

Apologies if this is misleading , was in local news paper without further info , now appears that this is for new cars rather that existing , which is to say the least a massive relief!! Thanks for clarifying !!

Emissions (g/CO2/km) First year rate Standard rate 0 £0 £0 1-50 £10 £140 51-75 £25 £140 76-90 £100 £140 91-100 £120 £140 101-110 £140 £140 111-130 £160 £140 131-150 £200 £140 151-170 £500 £140 171-190 £800 £140 191-225 £1200 £140 226-255 £1700 £140 over 255 £2000 £140 The above figures are the...

Hi could you please tell me the the size of the flexi pipe you bought (diameter) as without sawing through exhaust I won't know and I would like to order the part before I start hacking away , thanks ="honolulujoe, post: 3800224, member: 30644"]my s1 went in the same place as yours neil...

I'm just about to buy a clamp on repair front section for my 88 1982 land rover series , it is to repair section listed as 1821 , does anyone know the diameter of this please , your help would be much appreciated , thanks

Could anyone please tell me the diameter of the centre exhaust , Its standard , I'd need to cut it to measure it and then order so I'd be without Landy for a week , any help would be appreciated , thanks

I've bought this , I will eventually repair whole system , however these have got good reviews and I'm skint , support is reusable so I'm hoping for the best , all I need to do is measure part I need to cut out correctly so I'll need to take care with that

Hi , haven't been here for over a month (record for me ) employer has moved me 10 miles further away from home so I needed to buy a corsa for daily commuting as I didn't want to kill the series , anyway my series 3 exhaust has broken where it joins front pipe to back , can I cut out joint , use...

Hi , haven't been here for over a month (record for me ) employer has moved me 10 miles further away from home so I needed to buy a corsa for daily commuting as I didn't want to kill the series , anyway my series 3 exhaust has broken where it joins front pipe to back , can I cut out joint , use...