Hi, Recently put in new matrix and o rings in to fix leak , usual wet drivers carpet near door it was coolant as to touch it left your hands stickie and to taste it was sweet , coolant in header tank going down . Now its still leaking would the problem be those rubber o rings as i have checked...

Hi,i was wondering if there was anything in the 4x4 market i could buy to reduce the amount of water throwen up on the windscreen when going threw puddles , ok during the day , but night time driving with on coming cars on B roads is a bit heart thumping or has anyone done a d.i.y with any...

Hi,yep another question.Range Rover 4.0hse 2000 model,free play in steering wheel. Its just sitting there, door open, I get in, turn the ignition on and fire it up. Now, i can turn the steering wheel by two inches, when holding the steering wheel with my hands at the 'ten to two' position. There...

ANOTHER find door mirrors they do not demist,supposed to work all the time say's handbook,no fuse for this !! Yet again can anybody tell me how to fix this,or is it buy new there IS no fix,this is endless,i have another question but one will keep that for later..

Hi,continuity check done by removing wipers and arms remove plastic strips on either side of window 4 screws just under door seal warning mine were rusted so best screw drivers there then you go on to remove plastic strip at the bottom of window screen, watch that as its held on with about 12...

Hi,continuity spot on no pro's on either side even have taken terminals off and new put on and soldered.

The rangie has always had a pronounce click on the rear heated, relays in engine bay are new as is fuses even to the point off touching them while having someone turn the switch on and off and feeling the relays go on and off,there are no signs of broken wires in the screen itself, front screen...

Pronounced click fuse number 12 heated rear screen in the owners hand book,f**** thought i was on to a winner,never mind,no need to respond to this thread mind you, if anyone has any other idea's about getting the screen to work let me know,,,,,,,,,,,

Hi, Looking for the fault in my front heated screen,now all the usual have been checked,earthing,relays & fuse's,,,,but can i ask those in the know,i press rear heated and i get a pronounced click on and a click when i press off from underneath the driver's seat but when i press the front heated...

Hi,thanks for responses the lug is there but this lug has no hole on first seeing this i thought that who ever had done this before had forgotten to put in this screw but the hole to put this screw in is blanked off.

Hi everyone, I got stuck into the blend motors a couple of weeks ago and on dismantleing the numerous plastic pieces discovered grey splater marks on the inside off some of the plastic,looking on the web i found that the O rings at the heater matrix were suspect and leaking water as the rangie...

Hi,thanks for help people certainly opened one's eye's, me thinks i will stay away from 100w bulbs,thanks again

Hi,just wanted to check before i upgraded to h4 100/80 watt bulbs and if i am right h7 100w in my p38 that the electrical system would be able to cope with this load (always worried about overloading) should i be putting relays in as well ? and also me not knowing a lot but as i have read on...

Hi, Tried my heated front window yesterday morning and nothing happened no demist back window demisted in seconds but front nothing ,tonight i checked fuses and relays in engine bay, they are working fine so what have i missed ??

Hi again, Eventually got the site with british flag for american site and bought two thermal switch's cost £22 just to say i cheated on the rebuild of seat instead of putting on the original small rings i put on cable tie's two for each clip works well....

Hi, Just recently stripped driver's seat to fix heating element and fix two broken wire's rebuilt seat and after all that effort i have found that the thermal switch is knackered i was on the american web site DigiKey Corp. | Electronic Components Distributor | United States Home Page and found...

thanks everybody gave said bolts a damn good clean and put on slightly smaller socket and off they came,they were real bad,brake pads and disc's worse i have ever encountered thanks again

Help,trying to get carrier off front brake, now it is pretty rusty round there and the grief i had just getting the caliper off******does anybody know off a good method off getting the two carrier bolts off ie best to heat first or apply WD or what if these things round off what next,i do have...

Hi everyone, Another Question,,does anyone know the size of socket's i need to buy to remove carrier on the front and rear brake's on my rangie looks like those tx or star sockets, thanks.

Hi everyone, Oil and filter change coming up for my p38 i bought ardina engine flush and oil stop leak,engine flush pour into engine leave to idle for 15 mins then drain oil remove filter and put in new oil filter, was going to put in engine stop leak when done. Question. Is this stuff safe for...