I doubt glow plugs would have anything to do with it as it's been so mild lately. To help with removal of the glow plugs, spray with penetrating fluid for a couple of days then get the eng. upto temperature.

Thanks for that, I'll recheck at the weekend using the correct scale🙂. The SOC has gone down to 31% today but it still starts the same ! I can't see there being anything wrong with the truck as I wouldn't have thought it would start with a battery that low.

Blimey, a definite lack of quality in those parts ! Where are the gaskets/bolts made ?

Hi Keith, yes there seems to be a blanking plate missing, I think it's something to do with A/C ducting on foreign market models (in hot countries). I've just taken some pics but it won't let me upload them, something about file extensions? I didn't have any issues yesterday so I'll keep trying...

Gutted for you, as you say (and we know) all the time,effort & money spent. Wait 'til you've had a good look as it might be better the devil you know. 🤞 crossed for you,all the best.

That's good as there's no fix apart from replacing the ABS pump.

Have you checked for sticking ABS module? Mine showed a fault on my Foxwell & I get an occasional squeak which I presume is down to that intermittent, sticking ABS module.

There's no need to remove the manifold to access the SM it is a bit tight (with the pipes in the way) but as said long extension(s) 3/8 drive is best for the two bolts. Also as said disconnect battery first (make sure you have the radio code if needed before disconnecting). You could check the...

I would hazard a guess that the whole system holds about a litre so if you wanted to put 1.5 - 2 litres through it you should be ok.

Charged battery all day (disconnected) pic 2, then tonight checked the parasitic drain which was .26mA, pic 1. Is this about right ? Then a couple of pics of it charging once reconnected. All seems OK so I'll see what the SOC is in the morning.

Glad it's sorted.

Seems it's set to lead acid already.

Morning Gary, I will check the settings on it to see what battery type it's set to. I'm guessing something is wrong because I went out in it yesterday & before I started it the BMS was reading 41% & I was expecting the worst as the overnight temperature had dropped to 3 degrees but it just...

Whoops how did I miss that:vb-groan2:cheers.

Did the new switch fix the op's original problem (just to help others in the same situation) ?

Hi, I think it was reading about 44% on Sunday when I set off for Goodwood & went fine for the 200 mile round trip but I'll have a better look at the weekend. I use a USB charging thing in the fag lighter which has a built-in volt meter, which was showing the same as my MM 14.2 volts eng...

Hi, I haven't yet probably a weekend job now🙂.

I haven't had a chance to swap batteries yet but 24 hrs later & the truck hasn't been opened or used it's now down to this ! I know it will start 1st time even if I leave it a week, so as you say I'm not overly worried yet as it's still reasonably mild but I know the cold weather will soon...

Thanks guys, I'll put the 'spare' on just so I can keep it locked/immobilised & do as you say.

Hi all, has anyone fitted one of the Sealey battery monitoring devices (to any vehicle) ? I fitted one a few weeks back & it tells me my D2 battery is losing about 22% of it charge overnight e.g went the Goodwood Revival Sunday & got back about 19.00 & as you would expect the app on my phone for...